HFBR-5961ALZ Datasheet, PDF (8/13 Pages) AVAGO TECHNOLOGIES LIMITED – Multimode Small Form Factor (SFF) Transceivers for ATM, FDDI, Fast Ethernet and SONET OC-3/SDH STM-1 with LC connector

Immunity
Equipment utilizing these transceivers will be subject
to radio-frequency electromagnetic fields in some envi-
ronments.These transceivers have a high immunity to
such fields.
For additional information regarding EMI, susceptibil-
ity, ESD and conducted noise testing procedures and
results. Refer to Application Note 1166, Minimizing
Radiated Emissions of High-Speed Data Communica-
tions Systems.
Transceiver Reliability and Performance Qualification Data
The 2 x 5 transceivers have passed Avago reliability and
performance qualification testing and are undergoing
ongoing quality and reliability monitoring. Details are
available from your Avago sales representative.
These transceivers are manufactured at the Avago
Singapore location which is an ISO 9001 certified
facility.
Applications Support Material
Contact your local Avago Component Field Sales Office
for information on how to obtain PCB layouts and eval-
uation boards for the 2 x 5 transceivers.
200
180
1.0
160
1.5
140
2.0
120
2.5
3.0
3.0
tr/f– TRANSMITTER
OUTPUT OPTICAL RISE/
FALL TIMES – ns
HFBR-5961xxZ TRANS-
MITTER TEST RESULTS
OF λ_C,∆λAND tr/f ARE
CORRELATED AND COMPLY
WITH THE ALLOWED
SPECTRAL WIDTH AS A
FUNCTION OF CENTER
WAVELENGTH FOR
VARIOUS RISE AND
FALL TIMES.
100
1260
1280
1300
1320
1340 1360
l _C– TRANSMITTER OUTPUT OPTICAL RISE/FALL TIMES – ns
Figure 7. Transmitter Output Optical Spectral Width (FWHM) vs. Transmit-
ter Output Optical Center Wavelength and Rise/Fall Times
6
5
CONDITIONS:
4
1. T_A = +25 C
2. V_CC = 3.3 V dc
3. INPUT OPTICAL RISE/
3
FALL TIMES = 2.1/1.9 ns.
4. INPUT OPTICAL POWER
IS NORMALIZED TO
CENTER OF DATA SYMBOL.
2
5. NOTE 15 AND 16 APPLY.
1
0
-3
-2
-1
0
1
2
3
EYE SAMPLING TIME POSITION (ns)
Figure 8. Relative Input Optical Power vs Eye Sampling Time Position
Regulatory Compliance Table
Feature
Electrostatic Discharge
(ESD) to the Electrical
Pins
Electrostatic Discharge
(ESD) to the LC Recep-
tacle
Electromagnetic Inter-
ference (EMI)
Test Method
MIL-STD-883C
Variation of IEC 61000-4-2
FCC Class B
CENELEC CEN55022 VCCI
Class 2
Immunity
Variation of IEC 61000-4-3
Performance
Meets Class 2 (2000 to 3999 Volts).Withstand up to 2200 V
applied between electrical pins.
Typically withstand at least 25 kV without damage when
the LC connector receptacle is contacted by a Human Body
Model probe.
Transceivers typically provide a 10 dB marginto the noted
standard limits when tested at a certified test range with
the transceiver mounted toa circuit card without a chassis
enclosure.
Typically show no measurable effect from a 10 V/m field
swept from 80 to 450 MHz applied to the transceiver when
mounted to a circuit card withouta chassis enclosure.
Eye Safety
AEL Class 1EN60825-1 (+A11)
Compliant per Avago testing under single fault conditions.
TUV Certification - R 02071015
Component Recogni-
tion
Underwriters Laboratories and
Canadian Standards Association Joint
Component Recognition for Informa-
tion Technology Equipment including
Electrical Business Equipment
UL File #: E173874