HFBR-59L1AGEZ Datasheet, PDF (7/13 Pages) AVAGO TECHNOLOGIES LIMITED – 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver

Table 3. Absolute Maximum Ratings
Parameter
Symbol
Minimum Typical Maximum Unit
Notes
Storage Temperature
T_S
-40
+100
°C
1
Case Temperature
T_C
-10
+85
°C
1, 2
Relative Humidity
RH
5
95
%
1
Supply Voltage
V_CCT, R
-0.5
4
V
1, 2
Data/Control Input Voltage
V_I
-0.5
V_CC + 0.3 V
1
Sense Output CurrentSignal Detect [SD]
I_D
5.0
mA
1
Notes:
1. Absolute Maximum Ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short
period of time. See Reliability Data Sheets for specific reliability performance.
2. Between Absolute Maximum Ratings and the Recommended Operating Conditions, functional performance is not intended, device reliability is
not implied, and damage to the device may occur over an extended period of time.
Table 4. Recommended Operating Conditions
Parameter
Symbol
Minimum Typical Maximum Unit
Notes
Case Temperature
Module Supply Voltage
Data Rate:
Fibre Channel
Ethernet
T_C
V_CCT, R
-10
+25
+85
2.97
3.3
3.63
1.0625
1.25
°C
1
V
1
Gb/s
1
Gb/s
1
Notes:
1. Recommended operating conditions are those values outside of which functional performance is not intended, device reliability is not implied,
and damage to the device may occur over an extended period of time. See Reliability Data Sheet for specific reliability performance.
Table 5. Process Compatibility
Parameter
Hand Lead Solder:
Temperature
Time
Wave Solder and Aqueous Wash:
Temperature
Time
Notes:
1. Aqueous wash pressure < 110 psi.
Symbol
T_solder
t_time
T_solder
t_time
Minimum Typical
Maximum Unit
+260
°C
10
sec
+260
°C
10
sec
Notes
1
7