HFBR-59L1AGEZ Datasheet, PDF (4/13 Pages) AVAGO TECHNOLOGIES LIMITED – 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver

Eye Safety
These 850 nm VCSEL-based transceivers provide Class 1
eye safety by design. Avago has tested the transceiver de-
sign for compliance with the requirements listed in Table
1: Regulatory Compliance, under normal operating condi-
tions and under a single fault condition.
Flammability
The HFBR-59L1AL VCSEL transceiver housing is made of
metal and high strength, heat resistant, chemically resis-
tant, and UL 94V-0 flame retardant plastic.
Caution
There are no user serviceable parts nor is any maintenance
required for the HFBR-59L1AL. All adjustments are made
at the factory before shipment to our customers.
Tampering with or modifying the performance of the
HFBR- 59L1AL will result in voided product warranty. It
may also result in improper operation of the HFBR-59L1AL
circuitry, and possible overstress of the laser source. De-
vice degradation or product failure may result. Connec-
tion of the HFBR-59L1AL to a non-approved optical source,
operating above the recommended absolute maximum
conditions or operating the HFBR-59L1AL in a manner in-
consistent with its design and function may result in haz-
ardous radiation exposure and may be considered an act
of modifying or manufacturing a laser product.
The person(s) performing such an act is required by law to
recertify and reidentify the laser product under the provi-
sions of U.S. 21 CFR (Subchapter J) and the TUV.
Ordering Information
Please contact your local field sales engineer or one of
Avago Technologies franchised distributors for order-
ing information. For technical information regarding this
product, including the MSA, please visit Avago Technolo-
gies Semiconductors Products Website at www.Avago.
com/ view/fiber. Use the quick search feature to search for
this part number. You may also contact Avago Technolo-
gies Semiconductor Products Customer Response Center
at 1-800-235-0312.
Table 1. Regulatory Compliance
Feature
Test Method
Performance
Electrostatic Discharge
(ESD) to the Electrical Pins
MIL-STD-883C
Method 3015.4
Class 2 (>2000 V)
Electrostatic Discharge
(ESD) to the Duplex LC
Receptacle
Variation of IEC 61000-4-2
Typically withstand at least 25 kV without damage when the
duplex LC connector receptacle is contaced by a Human Body
Model probe.
Electromagnetic Interference
(EMI)
Immunity
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class 1
Variation of IEC 61000-4-3
Eye Safety
US FDA CDRH AEL Class 1
EN (IEC)60825-1, 2
EN60950 Class 1
System margins are dependent on customer board and chassis
design.
Typically shows a negligible effect from a 10 V/m field swept
from 80 to 1000 MHz applied to the transceiver without a
chassis enclosure.
CDRH file # 9720151
TUV file # R2079009
Component Recognition
Underwriters Laboratories and
Canadian Standards Association
Joint Component Recognition
for Information Technology
Equipment including Electrical
Business Equipment.
UL file # E173874
4