HFBR-59L1AGEZ Datasheet, PDF (1/13 Pages) AVAGO TECHNOLOGIES LIMITED – 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver

HFBR-59L1AL
1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm
SFF Low Voltage (3.3 V) Optical Transceiver
Data Sheet
Description
The HFBR-59L1AL from Avago Technologies is a high per-
formance, cost-effective optical transceiver for serial op-
tical data communications applications operating at 1.25
Gb/s and 1.0625 Gb/s. This module is designed for multi-
mode fiber and operates at a nominal wavelength of 850
nm.
The transceiver incorporates 3.3 V DC compatible tech-
nology including an 850 nm VCSEL transmitter. The HFBR-
59L1AL offers maximum flexibility to Fibre Channel and
Ethernet designers, manufacturers, and system integra-
tors. It is designed for use in short reach multimode fiber
optic 1000BASE-SX and Fiber Channel (100-M5-SN-1)
links.
This device is also designed for a wide voltage and tem-
perature range of operation. This transceiver is compliant
with the Small Form Factor Multi-Source Agreement and
is fully compliant with all equipment meeting the Gigabit
Ethernet (1000 Base-SX) and Fibre Channel (FC-PI 100-M5-
SN-I, FC-PI 100-M6-SN-I, FC-PH2 100-M5-SN and FC-PH2
100-M6-SN-I 1.0625 GBd) specifications.
Related Products
x HFCT-59L1ATL: 1300 nm Small Form Factor optical
transceiver for 10 km Gigabit Ethernet links
x HFBR-5911L/AL: 850 nm Small Form Factor optical
transceiver for short reach Gigabit Ethernet (1000BASE-
SX) links
x HFBR-5701L/LP: 850 nm Small Form Factor Pluggable
optical transceiver for short reach Gigabit Ethernet
(1000BASE-SX) and 1.0625 Gbd Fibre Channel links
x HDMP-2634: Single SerDes IC 2.5/1.25 Gigabit
x HDMP-1687: Quad SerDes IC for Gigabit Ethernet with
10 bit parallel interface and TTL clock input
x HDMP-1685A: Quad SerDes IC for Gigabit Ethernet with
5 bit parallel interface and DDR TTL clock input
x HDMP-1636A/46A: Single SerDes IC for Gigabit Ethernet
and Fiber Channel
x HDMP-1637A: Single SerDes IC with PECL RefClk
x HDMP-1638: Single SerDes IC with PECL RefClk and
Dual Serial I/O
Features
x Data rate specification: 1.25 GBd operation for
IEEE 802.3 Gigabit Ethernet 1000BASE-SX 1.0625
GBd operation for FC-PI 100-M5-SN-I and FC-PI
100-M6-SN-I
x Wide temperature and supply voltage operation
x Industry standard 2 x 5 SFF package
x LC-duplex connector optical interface
x Link lengths at 1.25 GBd:
0.5 to 500 m – 50/125 mm MMF
0.5 to 275 m – 62.5/125 mm MMF
x Link lengths at 1.0625 GBd:
0.5 to 500 m – 50/125 mm MMF
0.5 to 300 m – 62.5/125 mm MMF
x Reliable 850 nm Vertical Cavity Surface Emitting Laser
(VCSEL) source technology
x Laser AEL Class I (eye safe) per:
US 21 CFR (J)
EN 60825-1 (+All)
x Single +3.3 V power supply operation
x Wave solder and aqueous wash process compatible
Applications
x Short reach Gigabit Ethernet links
x High speed backplane interconnects
x Switched backbones
x iSCSI applications
x Mass storage system I/O
x Computer system I/O
x High speed peripheral interface
x High speed switching systems
x Host adaptor I/O