HCPL-7800-500E Datasheet, PDF (5/18 Pages) AVAGO TECHNOLOGIES LIMITED – 15 kV/μs Common-Mode Rejection at VCM = 1000 V

Regulatory Information
The HCPL-7800(A) has been approved by the following organizations:
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2): 2003-01.
UL
Approved under UL 1577, component
recognition program up to V_ISO = 3750 Vrms.
CSA
Approved under CSA Component Acceptance
Notice #5, File CA 88324.
IEC/EN/DIN EN 60747-5-2 Insulation Characteristics^[1]
Description
Symbol
Installation classification per DIN VDE 0110/1.89, Table 1
for rated mains voltage ­300 Vrms
for rated mains voltage ­600 Vrms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b^[2]
V_IORM x 1.875 = V_PR, 100% Production Test with
t_m = 1 sec, Partial discharge < 5 pC
Input to Output Test Voltage, Method a^[2]
V_IORM x 1.5 = V_PR, Type and Sample Test,
t_m = 60 sec, Partial discharge < 5 pC
V_IORM
V_PR
V_PR
Highest Allowable Overvoltage
(Transient Overvoltage t_ini = 10 sec)
V_IOTM
Safety-limiting values—maximum values
allowed in the event of a failure.
Case Temperature
Input Current^[3]
Output Power^[3]
Insulation Resistance at T_S, V_IO = 500 V
T_S
I_S,INPUT
P_S,OUTPUT
R_S
Notes:
1. Insulation characteristics are guaranteed only within the safety maximum ratings which
must be ensured by protective circuits within the application. Surface Mount Classification is
Class A in accordance with CECC00802.
2. Refer to the optocoupler section of the Isolation and Control Components Designer’s Cata-
log, under Product Safety Regulations section, (IEC/EN/DIN EN 60747-5-2) for a detailed descrip-
tion of Method a and Method b partial discharge test profiles.
3. Refer to the following figure for dependence of PS and IS on ambient temperature.
Characteristic
I-IV
I-III
55/100/21
2
891
1670
1336
6000
Unit
V_PEAK
V_PEAK
V_PEAK
V_PEAK
175
°C
400
mA
600
mW
>10⁹
Ω
800
P _S (mW)
700
IS (mA)
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200
TA - CASE TEMPERATURE - ^oC