HCPL-0708-560E Datasheet, PDF (1/12 Pages) AVAGO TECHNOLOGIES LIMITED – High Speed CMOS Optocoupler

HCPL-0708
High Speed CMOS Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Available in SO-8 package, the HCPL-0708 optocoupler
utilizes the latest CMOS IC technology to achieve out-
standing performance with very low power consump-
tion. Basic building blocks of the HCPL-0708 are a high
speed LED and a CMOS detector IC. The detector incor-
porates an integrated photodiode, a high-speed trans-
impedance amplifier, and a voltage comparator with an
output driver.
Functional Diagram
NC 1
ANODE 2
8 V_DD
7 NC
Features
• +5 V CMOS compatibility
• 15 ns typical pulse width distortion
• 30 ns max. pulse width distortion
• 40 ns max. propagation delay skew
• High speed: 15 MBd
• 60 ns max. propagation delay
• 10 kV/µs minimum common mode rejection
• –40 to 100°C temperature range
• Safety and regulatory approvals pending
– UL recognized
3750 V rms for 1 min. per UL 1577 for HCPL-0708
– CSA component acceptance Notice #5
– IEC/EN/DIN EN 60747-5-2
approved for HCPL-0708 Option 060
CATHODE 3
NC 4
6 V_O
5 GND
TRUTH TABLE
LED
OFF
ON
V_O, OUTPUT
H
L
Applications
• Scan drive in PDP
• Digital field bus isolation: DeviceNet, SDS, Profibus
• Multiplexed data transmission
• Computer peripheral interface
• Microprocessor system interface
*A 0.1 µF bypass capacitor must be
connected between pins 5 and 8.
HCPL-0710 Functional Diagram
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.