|
ADNS-7700 Datasheet, PDF (1/60 Pages) AVAGO TECHNOLOGIES LIMITED – One chip USB LaserStream Mouse Sensors Single 5.0 volts power supply | |||
|
ADNS-7700
One chip USB LaserStream⢠Mouse Sensors
Data Sheet
Description
The ADNS-7700 series are compact, low cost, one chip USB
LaserStreamTM mouse sensors designed for implemention
of a non-mechanical tracking engine in computer mice.
This ADNS-7700 sensor is a 22-pin integrated molded
lead-frame DIP package. It comprises a USB controller
and LaserStream navigation sensor with VCSEL integrated
within a single package. It is designed to be used with the
ADNS-6180-001 trim lens or ADNS-6180-002 wide trim
lens to achieve the LaserStream performance featured
in this document. These parts provide a complete and
compact navigation system with no moving parts and
precision optical alignment to facilitate high volume as-
sembly. Avago has pre-calibrated the laser power prior
shipment, thus NO laser power calibration is required at
manufacturer site, therefore reducing assembly time and
associated cost.
The motion output is a selectable 8/12/16-bit USB data re-
porting format. This device is compliant to USB Revision
2.0 low speed specification. The ADNS-7700 series are
designed with on-chip One-Time-Programmable (OTP)
memory. This enables device configuration flexibility for
the manufacturer to cater for various market segments.
Theory of Operation
The ADNS-7700 is based on Laser-Stream navigation tech-
nology that measures changes in position by optically ac-
quiring sequential surface images (per frames) and math-
ematically determining the direction and magnitude of
motion movement.
It contains an Image Acquisition System (IAS), a Digital
Signal Processor (DSP) and USB stream output. The IAS
acquires microscopic surface images via the lens. These
images are processed by the DSP to determine the direc-
tion and distance of motion. The DSP generates the ïx
and ïy relative displacement values which are converted
to USB motion data.
Features
ï·ï One chip USB laser mouse sensor with VCSEL integrated
in single package
ï·ï LaserStream⢠navigation technology
ï·ï USB 2.0 Low Speed Compliance
ï·ï Meets HID Revision 1.11
ï·ï Single 5.0 volts power supply
ï·ï Compliance to IEC/EN 60825-1 Class 1 Eye Safety
â Pre-calibrated laser power prior shipment
â Class 1 eye safety AEL
â On-chip Laser fault detect circuitry
ï·ï High speed motion detection at 45 inches per second
(ips) and acceleration up to 20g
ï·ï Input buttons: 3 or 5-buttons
ï·ï Mechanical Z-Wheel interface for vertical scroll
ï·ï On-chip OTP memory for device configuration
flexibility without any external software driver:
â Enable/Disable Tilt-Wheel* function that supports
horizontal scroll in Microsoft Vista OS.
â 8/12/16-bit USB motion data reporting
â Resolution
ï· Programmable from 400-2400 counts per inch (cpi)
with ~100cpi incremental step
ï· 3 selections of On-the-Fly (OTF) resolution mode
setting
ï·ï KeyMap (KM) for keyboard shortcut key
ï·ï Customizable VID, PID, Manufacturer string and
Product string
ï·ï 4-axis sensor rotations: 0°, 90°, 180° or 270°
Applications
ï·ï Corded laser mice
ï·ï Integrated input devices
* Disclaimer: All designers and manufacturers of this design must assure
that they have all necessary intellectual property rights
|
▷ |