AT24C01ASC_14 Datasheet, PDF (3/14 Pages) ATMEL Corporation – Schmitt Trigger, Filtered Inputs for Noise Suppression

AT24C01ASC/02SC/04SC/08SC/16SC
AT24C04SC, 4K SERIAL EEPROM: Internally organized with 32 pages of 16 bytes
each, the 4K requires a 9-bit data word address for random word addressing.
AT24C08SC, 8K SERIAL EEPROM: Internally organized with 64 pages of 16 bytes
each, the 8K requires a 10-bit data word address random word addressing.
AT24C16SC, 16K SERIAL EEPROM: Internally organized with 128 pages of 16 bytes
each, the 16K requires an 11-bit data word address random word addressing.
Pin Capacitance
Table 2. Pin Capacitance⁽¹⁾
Applicable over recommended operating range from T_A = 25°C, f = 1.0 MHz, V_CC = +2.7V
Symbol Test Condition
Max
C_I/O
Input/Output Capacitance (SDA)
8
C_IN
Input Capacitance (SCL)
6
Note: 1. This parameter is characterized and is not 100% tested.
Units
pF
pF
Conditions
V_I/O = 0V
V_IN = 0V
DC Characteristics
Table 3. DC Characteristics⁽¹⁾
Symbol Parameter
Test Condition
Min
Typ
Max
Units
V_CC
I_CC
I_CC
I_SB1
I_SB2
I_LI
I_LO
V_IL
V_IH
V_OL
Notes:
Supply Voltage
2.7
5.5
V
Supply Current V_CC = 5.0V
READ at 100 kHz
0.4
1.0
mA
Supply Current V_CC = 5.0V
WRITE at 100 kHz
2.0
3.0
mA
Standby Current V_CC = 2.7V
V_IN = V_CC or GND
1.6
4.0
µA
Standby Current V_CC = 5.0V
V_IN = V_CC or GND
8.0
18.0
µA
Input Leakage Current
V_IN = V_CC or GND
0.10
3.0
µA
Output Leakage Current
Input Low Level⁽²⁾
Input High Level⁽²⁾
V_OUT = V_CC or GND
0.05
3.0
µA
−0.6
V_CC x 0.7
V_CC x 0.3
V
V_CC + 0.5
V
Output Low Level V_CC = 3.0V
I_OL = 2.1 mA
0.4
V
1. Applicable over recommended operating range from: T_AC = 0°C to +70°C, V_CC = +2.7V to +5.5V (unless otherwise noted)
2. V_IL min and V_IH max are reference only and are not tested.
AC Characteristics
Table 4. AC Characteristics⁽¹⁾
Symbol
Parameter
Min
Max
f_SCL
t_LOW
t_HIGH
t_I
t_AA
t_BUF
Clock Frequency, SCL
400
Clock Pulse Width Low
1.2
Clock Pulse Width High
Noise Suppression Time⁽²⁾
0.6
50
Clock Low to Data Out Valid
0.1
0.9
Time the bus must be free before a new transmission can start⁽¹⁾
1.2
Units
kHz
µs
µs
ns
µs
µs
3
1610B–SEEPR–04/04