ATMEGA329V_0611 Datasheet, PDF (100/375 Pages) ATMEL Corporation – 8-bit Microcontroller with In-System Programmable Flash

Table 55. Waveform Generation Mode Bit Description⁽¹⁾
WGM01 WGM00 Timer/Counter
Mode (CTC0) (PWM0) Mode of Operation TOP
Update of TOV0 Flag
OCR0A at Set on
0
0
0
Normal
0xFF Immediate MAX
1
0
1
PWM, Phase Correct 0xFF TOP
BOTTOM
2
1
0
CTC
OCR0A Immediate MAX
3
1
1
Fast PWM
0xFF BOTTOM MAX
Note:
1. The CTC0 and PWM0 bit definition names are now obsolete. Use the WGM01:0 def-
initions. However, the functionality and location of these bits are compatible with
previous versions of the timer.
• Bit 5:4 – COM0A1:0: Compare Match Output Mode
These bits control the Output Compare pin (OC0A) behavior. If one or both of the
COM0A1:0 bits are set, the OC0A output overrides the normal port functionality of the
I/O pin it is connected to. However, note that the Data Direction Register (DDR) bit cor-
responding to the OC0A pin must be set in order to enable the output driver.
When OC0A is connected to the pin, the function of the COM0A1:0 bits depends on the
WGM01:0 bit setting. Table 56 shows the COM0A1:0 bit functionality when the
WGM01:0 bits are set to a normal or CTC mode (non-PWM).
Table 56. Compare Output Mode, non-PWM Mode
COM0A1 COM0A0 Description
0
0
Normal port operation, OC0A disconnected.
0
1
Toggle OC0A on compare match
1
0
Clear OC0A on compare match
1
1
Set OC0A on compare match
Table 57 shows the COM0A1:0 bit functionality when the WGM01:0 bits are set to fast
PWM mode.
Table 57. Compare Output Mode, Fast PWM Mode⁽¹⁾
COM0A1 COM0A0 Description
0
0
Normal port operation, OC0A disconnected.
0
1
Reserved
1
0
Clear OC0A on compare match, set OC0A at BOTTOM,
(non-inverting mode)
1
1
Set OC0A on compare match, clear OC0A at BOTTOM,
(inverting mode)
Note:
1. A special case occurs when OCR0A equals TOP and COM0A1 is set. In this case,
the compare match is ignored, but the set or clear is done at BOTTOM. See “Fast
PWM Mode” on page 95 for more details.
Table 58 shows the COM0A1:0 bit functionality when the WGM01:0 bits are set to
phase correct PWM mode.
100 ATmega329/3290/649/6490
2552H–AVR–11/06