AMIS-710616 Datasheet, PDF (12/19 Pages) AMI SEMICONDUCTOR – CIS PCB

AMIS-710616-AS: CIS PCB
Product Specification
Data Sheet
12.0 Drawing on Mechanical Structure
Attached are six mechanical drawings. The first drawing (Figure 6) shows an outline drawing of the complete CIS system, consisting of
the stiffener plate, the interconnecting harness and the amplifier board. There are two connector pin configuration tables, one is for the
two sensor boards and the input for the amplifier board and the other is for the two output connectors on the amplifier boards. These
two tables show the pin numbering and names for the six connectors that are seen in the drawing. For detailed descriptions of the
interconnections and their functions, see section 9.0.
The second drawing (Figure 7) shows the view of the stiffener board. The stiffener board is a ¼” aluminum backing plate on which the
two image sensor boards are mounted. The schematic drawing provides the dimensions of the plate, its access holes for the two-
sensor board’s connectors, along with all of the required dimensions.
The third drawing (Figure 8) shows a view of the two sensor boards mounted on the stiffener board. It shows the direction of the scan,
its first pixel location and its video read line location. It provides the dimensions on the connector height, the thickness of PCB board
and its component height.
The fourth drawing (Figure 9), is a backside view of the stiffener plate. It shows the location of the connectors and its pin order and
direction.
The fifth drawing (Figure 10) shows a view of the PCB outline. The three views of the board provide the outline dimensions, its length,
its width and its thickness. It also depicts the mounting holes and their dimensions and locations.
The six drawing (Figure 11), shows a view of the PCB with its connectors.
AMI Semiconductor – July 06, M-20595-001
12
www.amis.com