AMIS-30660 Datasheet, PDF (1/11 Pages) AMI SEMICONDUCTOR – High Speed CAN Transceiver

AMIS-30660 High Speed CAN Transceiver
Data Sheet
1.0 Key Features
• Fully compatible with the “ISO 11898-2” standard
• Certified “Authentication on CAN Transceiver
Conformance (d1.1)”
• High speed (up to 1 Mbaud)
• Ideally suited for 12V and 24V industrial and automotive
applications
• Low Electromagnetic Emission (EME) common-mode-
choke is no longer required
• Differential receiver with wide common-mode range for
high Electro Magnetic Susceptibility (EMS) (+/- 35V)
2.0 General Description
The AMIS-30660 CAN transceiver is the interface between a
Controller Area Network (CAN) protocol controller and the
physical bus and may be used in both 12V and 24V systems.
The transceiver provides differential transmit capability to
the bus and differential receive capability to the CAN
• No disturbance of the bus lines with an unpowered node
• Transmit data (TXD) dominant time-out function
• Thermal protection
• Bus pins protected against transients in an automotive
environment
• Power down mode in which the transmitter is disabled
• Input levels compatible with 3.3V devices
• Short-circuit proof to supply voltage & ground
controller. Due to the wide common mode voltage range of
the receiver inputs, the AMIS-30660 is able to reach
outstanding levels of electromagnetic susceptibility.
Similarly, extremely low electromagnetic emission is
achieved by the excellent matching of the output signals.
3.0 Important Characteristics
Symbol
V_CANH
V_CANL
Vi(dif)(bus_dom)
Tpd(rec-dom)
& Tpd(dom-rec)
CM-range
V_CM-peak
V_CM-step
Parameter
DC voltage at pin CANH
DC voltage at pin CANL
Differential bus output voltage
Propagation delay TxD to RxD
Input common-mode range
for comparator
Common-mode peak
Common-mode step
Conditions
Min
0<VCC<5.25 V; no time limit -45^*
0<VCC<5.25 V; no time limit -45^*
Dominant 42.5 Ω <RLT<60 Ω 1.5
See Fig. 7
70
Guaranteed differential receiver
threshold and leakage current -35
See Fig. 8 & Fig. 9 (Note)
-500
See Fig. 8 & Fig. 9 (Note)
-150
Note : The parameters V_CM-peak and V_CM-step guarantee low electromagnetic emission.
* -85V min & +60V max also possible, please contact your local sales representative for details.
Max
+45^*
+45^*
3
245
+35
500
150
Unit
V
V
V
ns
V
mV
mV
4.0 Ordering Information
Part N° AMIS-30660
Package SO-8
Temp. Range -40°C…125°C
AMI Semiconductor
www.amis.com
1