EPM7032AETI44-7N Datasheet, PDF (7/64 Pages) Altera Corporation – Programmable Logic Device Family

Figure 1. MAX 7000A Device Block Diagram
INPUT/GCLK1
INPUT/OE2/GCLK2
INPUT/OE1
MAX 7000A Programmable Logic Device Data Sheet
INPUT/GCLRn
6 or 10 Output Enables (1)
2 to 16 I/O
2 to 16 ^{LAB A}
I/O ^{2 to 16}
Control
Block
Macrocells
1 to 16
36
16
6 or 10 Output Enables (1)
LAB B _{2 to 16}
36
Macrocells
17 to 32
16
2 to 16 _I/O
Control
Block
2 to 16 I/O
2 to 16 I/O
6
2 to 16 ^{LAB C}
2 to 16
PIA
2 to 16
6
LAB D _{2 to 16}
I/O ^{2 to 16}
Control
Block
Macrocells
33 to 48
36
16
36
Macrocells
49 to 64
16
2 to 16 _I/O
Control
Block
2 to 16 I/O
6
2 to 16
2 to 16
6
Note:
(1) EPM7032AE, EPM7064AE, EPM7128A, EPM7128AE, EPM7256A, and EPM7256AE devices have six output enables.
EPM7512AE devices have 10 output enables.
Logic Array Blocks
The MAX 7000A device architecture is based on the linking of
high-performance LABs. LABs consist of 16-macrocell arrays, as shown in
Figure 1. Multiple LABs are linked together via the PIA, a global bus that
is fed by all dedicated input pins, I/O pins, and macrocells.
Each LAB is fed by the following signals:
■ 36 signals from the PIA that are used for general logic inputs
■ Global controls that are used for secondary register functions
■ Direct input paths from I/O pins to the registers that are used for fast
setup times
Altera Corporation
7