English
Language : 

EY1501DI-ADJ Datasheet, PDF (5/13 Pages) Altera Corporation – EY1501DI-ADJ High Performance 1A LDO
Page 5
Electrical Specifications Unless otherwise noted, VIN = VOUT + 0.4V, VOUT = 1.8V, CIN = COUT = 2.2µF, TJ = +25°C. Applications must follow thermal
guidelines of the package to determine worst case junction temperature. Please refer to “Applications Information” on page 8. Boldface limits apply over the
operating temperature range, -40°C to +125°C. (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 9) TYP (Note 9) UNITS
EN PIN CHARACTERISTICS
Turn-on Threshold
Hysteresis (Rising Threshold)
EN Pin Turn-on Delay
EN Pin Leakage Current
SOFT-START CHARACTERISTICS
2.2V < VIN < 6V
2.2V < VOUT + 0.4V < 6V
COUT = 10µF, ILOAD = 1A
VIN = 6V, EN = 3V
0.3
0.8
1
V
10
80
200
mV
100
µs
1
µA
SS Pin Currents (Note 11)
IPD
ICHG
VIN = 3.5V, EN = 0V, SS = 1V
0.5
1
1.3
mA
-3.3
-2
-0.8
µA
POK PIN CHARACTERISTICS
VOUT POK Flag Threshold
75
85
92
%VOUT
VOUT POK Flag Hysteresis
4
%
POK Flag Low Voltage
VIN = 2.5V, ISINK = 500µA
100
mV
POK Flag Leakage Current
VIN = 6V, POK = 6V
1
µA
NOTES:
9. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
10. Dropout is defined as the difference in supply VIN and VOUT when the supply produces a 2% drop in VOUT from its nominal voltage.
11. IPD is the internal pull down current that discharges the external SS capacitor on disable. ICHG is the current from the SS pin that charges the
external SS capacitor during start-up.
May 2014 Altera Corporation
10039
Enpirion Power Datasheet EY1501DI-ADJ High Performance 1A LDO
May 28, 2014
Rev A