ACEX1K Datasheet, PDF (1/86 Pages) Altera Corporation – Programmable Logic Device Family

June 2001, ver. 3.1
ACEX 1K
Programmable Logic Device Family
®
Data Sheet
Features...
s Programmable logic devices (PLDs), providing low cost
system-on-a-programmable-chip (SOPC) integration in a single
device
– Enhanced embedded array for implementing megafunctions
such as efficient memory and specialized logic functions
– Dual-port capability with up to 16-bit width per embedded array
block (EAB)
– Logic array for general logic functions
s High density
– 10,000 to 100,000 typical gates (see Table 1)
– Up to 49,152 RAM bits (4,096 bits per EAB, all of which can be
used without reducing logic capacity)
s Cost-efficient programmable architecture for high-volume
applications
– Cost-optimized process
– Low cost solution for high-performance communications
applications
s System-level features
– MultiVolt^TM I/O pins can drive or be driven by 2.5-V, 3.3-V, or
5.0-V devices
– Low power consumption
– Bidirectional I/O performance (setup time [t_SU] and clock-to-
output delay [t_CO]) up to 250 MHz
– Fully compliant with the peripheral component interconnect
Special Interest Group (PCI SIG) PCI Local Bus Specification,
Revision 2.2 for 3.3-V operation at 33 MHz or 66 MHz
Table 1. ACEX^TM 1K Device Features
Feature
Typical gates
Maximum system gates
Logic elements (LEs)
EABs
Total RAM bits
Maximum user I/O pins
EP1K10
10,000
56,000
576
3
12,288
136
EP1K30
30,000
119,000
1,728
6
24,576
171
EP1K50
50,000
199,000
2,880
10
40,960
249
EP1K100
100,000
257,000
4,992
12
49,152
333
Altera Corporation
1
A-DS-ACEX-3.1