AK4534 Datasheet, PDF (9/64 Pages) Asahi Kasei Microsystems – 16Bit CODEC with MIC/HP/SPK-AMP

ASAHI KASEI
[AK4534]
FILTER CHARACTERISTICS
(Ta=−10 ∼ 70°C; AVDD, DVDD, PVDD, HVDD=2.4 ∼ 3.6V; fs=44.1kHz; DEM=OFF)
Parameter
Symbol
min
typ
ADC Digital Filter (Decimation LPF):
Passband
(Note 19) ±0.1dB
PB
−1.0dB
−3.0dB
0
-
20.0
-
21.1
Stopband
SB
27.0
Passband Ripple
PR
Stopband Attenuation
SA
65
Group Delay
(Note 20)
GD
17.0
Group Delay Distortion
∆GD
0
ADC Digital Filter (HPF):
Frequency Response
−3.0dB
FR
3.4
(Note 19)
−0.5dB
10
−0.1dB
22
DAC Digital Filter:
Passband
(Note 19) ±0.1dB
PB
−6.0dB
0
-
22.05
Stopband
SB
24.1
Passband Ripple
PR
Stopband Attenuation
SA
43
Group Delay
(Note 20)
GD
16.8
DAC Digital Filter + SCF:
Frequency Response: 0 ∼ 20.0kHz
FR
±0.5
BOOST Filter:
(Note 21)
Frequency Response MIN 20Hz
FR
-
5.74
100Hz
-
2.92
1kHz
-
0.0
MID 20Hz
FR
-
5.94
100Hz
-
4.71
1kHz
-
0.14
MAX 20Hz
FR
-
16.04
100Hz
-
10.55
1kHz
-
0.3
max
17.4
-
-
±0.1
20.0
-
±0.06
-
-
-
-
-
-
-
-
-
Units
kHz
kHz
kHz
kHz
dB
dB
1/fs
µs
Hz
Hz
Hz
kHz
kHz
kHz
dB
dB
1/fs
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Note 19. The passband and stopband frequencies scale with fs (system sampling rate).
For example, ADC is PB=0.454*fs (@-1.0dB), DAC is PB=0.454*fs (@-0.01dB).
Note 20. The calculated delay time caused by digital filtering. This time is from the input of analog signal to setting of the
16-bit data of both channels from the input register to the output register of the ADC. This time includes the
group delay of the HPF. For the DAC, this time is from setting the 16-bit data of both channels from the input
register to the output of analog signal.
Note 21. These frequency responses scale with fs. If a high-level and low frequency signal is input, the analog output clips
to the full-scale.
MS0133-E-03
-9-
2003/5