|
AKD4584 Datasheet, PDF (8/41 Pages) Asahi Kasei Microsystems – Evaluation board Rev.A for AK4584 | |||
|
◁ |
ASAHI KASEI
[AKD4584]
(1-3) D/A evaluation using DIR function of AK4114
Using PORT1 (DIR). Nothing should be connected to J7 (RX), PORT5 (DIR) and PORT6 (ROM). Remove the
Xâtal (X1). JP6 (EXT) should be short. In normal speed, double speed mode and quad speed mode, JP1 (MCKO),
JP4 (MCLK), JP5 (BCFS) and JP7 (LRFS) should be open.
JP3
JP6
XTI
EXT
JP10
MCLK
JP11
BICK
JP14
LRCK
JP15
SDTI
DIR EXT DIR EXT DIR ADC
⢠SW2 (MODE) setting (See Table 1)
(1) Set the audio interface format of AK4114 using DIF2-0.
(2) Set the master clock output of AK4114using OCKS1-0.
(3) Set the PLL mode or Xâtal mode of AK4114 using CM0.
(4) When XTALE is âHâ, MCLK can output from MCKO1/2 pins though AK4584 is powered down.
(5) When DMCK is âHâ, MCKO1 output is disabled.
H 1 2 3 4 5 6 7 8 9 10
L
Above figure is 24bit MSB justified, MCKO output of AK4114 is 256fs, AK4114 is PLL mode.
In quad speed mode of AK4114, set OCKS1=âHâ and OCKS0=âHâ. The MCKO output of AK4114 is output
128fs.
<KM065800>
-8-
â01/11
|
▷ |