AKD4584 Datasheet, PDF (14/41 Pages) Asahi Kasei Microsystems – Evaluation board Rev.A for AK4584

ASAHI KASEI
[AKD4584]
2. Control Software Manual
„ Set-up of evaluation board and control software
1. Set up the AKD4584 according to previous term.
2. Connect IBM-AT compatible PC with AKD4584 by 10-line type flat cable (packed with AKD4584). Take care of the
direction of 10pin header. (This control software does not operate on Windows NT/2000, therefore please operate it
on Windows 95/98.)
3. Insert the floppy-disk labeled “AKD4584 Control Program ver 1.0” into the floppy-disk drive.
4. Access the floppy-disk drive and double-click the icon of “akd4584-1.exe” and “akd4584-2” to set up the control
program.
5. Then please evaluate according to the follows.
„ Explanation of each buttons
1. [Port Setup] : Set up the printer port.
2. [Write default] : Initialize the register of AK4584.
3. [All Read] : Read the all register of AK4584.
4. [Function1] : Dialog to write data by keyboard operation.
5. [Function2] : Dialog to evaluate IPGA and OATT.
6. [Write] :
Dialog to write data by mouse operation.
7. [Read] :
Read each register data by mouse operation.
„ Explanation of each dialog
1. [Function1 Dialog] : Dialog to write data by keyboard operation
Address Box: Input register address in 2 figures of hexadecimal.
Data Box:
Input register data in 2 figures of hexadecimal.
If you want to write the input data to AK4584, click “OK” button. If not, click “Cancel” button.
2. [Function2 Dialog] : Dialog to evaluate IPGA and OATT
This dialog corresponds to only addr=04H, 05H, 06H, 07H.
Address Box: Input register address in 2 figures of hexadecimal.
Start Data Box: Input start data in 2 figures of hexadecimal.
End Data Box: Input end data in 2 figures of hexadecimal.
Interval Box:
Data is written to AK4584 by this interval.
Step Box:
Data changes by this step.
Mode Select Box:
If you check this check box, data reaches end data, and returns to start data.
[Example] Start Data = 00, End Data = 09
Data flow: 00 01 02 03 04 05 06 07 08 09 09 08 07 06 05 04 03 02 01 00
If you do not check this check box, data reaches end data, but does not return to start data.
[Example] Start Data = 00, End Data = 09
Data flow: 00 01 02 03 04 05 06 07 08 09
If you want to write the input data to AK4584, click “OK” button. If not, click “Cancel” button.
<KM065800>
- 14 -
’01/11