AKD4569 Datasheet, PDF (6/27 Pages) Asahi Kasei Microsystems – Evaluation board Rev.A for AK4569

ASAHI KASEI
[AKD4569]
AK4569 Control Program operation manual
n Set-up of evaluation board and control software
1. Set up the AKD4569 according to above mentioned setting.
2. Connect IBM-AT compatible PC with AKD4569 by 10-line type flat cable (packed with AKD4569). Take care of
the direction of 10pin header. (Please install the driver in the floppy-disk when this control software is used on
Windows 2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device control software”.
In case of Windows95/98/ME, this installation is not needed. This control software does not operate on Windows
NT.)
3. Insert the CD-ROM labeled “AK4569 Evaluation Kit” into the CD-ROM drive.
4. Access the CD-ROM drive and double-click the icon of “akd4569.exe” to set up the control program.
5. Then please evaluate according to the followings.
n Operation flow
Keep the following flow.
1. Set up the control program.
2. Click “Port Setup” button.
3. Then set up the dialog and input data.
n Explanation of each buttons
1. [Port Setup] : set up the printer port.
2. [Write default] : initialize the register of AK4569.
3. [Function1] : Dialog to write data by keyboard operation.
4. [Function2] : Dialog to evaluate IPGA and ATTL/ATTR/ATTM.
5. [Write] : write data to each register.
<KM074000>
-6-
2004/02