AK4645 Datasheet, PDF (6/96 Pages) Asahi Kasei Microsystems – Stereo CODEC with MIC/HP-AMP

ASAHI KASEI
„ Handling of Unused Pin
The unused I/O pins should be processed appropriately as below.
Classification
Analog
Digital
Pin Name
MPWR, VCOC/RIN3, HPR, HPL, MUTET,
RIN4/IN4−, LIN4/IN4+, ROUT/LOP,
LOUT/LON, MIN/LIN3, RIN2/IN2−,
LIN2/IN2+, LIN1/IN1−, RIN1/IN1+
MCKO
MCKI
[AK4645]
Setting
These pins should be open.
This pin should be open.
This pin should be connected to HVSS.
ABSOLUTE MAXIMUM RATINGS
(AVSS, HVSS=0V; Note 3)
Parameter
Symbol
min
Power Supplies: Analog
AVDD
−0.3
Digital
DVDD
−0.3
Digital I/O
TVDD
−0.3
Headphone-Amp
HVDD
−0.3
|AVSS – HVSS| (Note 4)
∆GND
-
Input Current, Any Pin Except Supplies
IIN
-
Analog Input Voltage (Note 5)
VINA
−0.3
Digital Input Voltage (Note 6)
VIND
−0.3
Ambient Temperature (powered applied)
Ta
−30
Storage Temperature
Tstg
−65
max
6.0
6.0
6.0
6.0
0.3
±10
AVDD+0.3
TVDD+0.3
85
150
Units
V
V
V
V
V
mA
V
V
°C
°C
Note 3. All voltages with respect to ground.
Note 4. AVSS and HVSS must be connected to the same analog ground plane.
Note 5. I2C, RIN4/IN4−, LIN4/IN4+, MIN/LIN3, RIN3, RIN2/IN2−, LIN2/IN2+, LIN1/IN1−, RIN1/IN1+ pins
Note 6. PDN, CSN/CAD0, CCLK/SCL, CDTI/SDA, SDTI, LRCK, BICK, MCKI pins
Pull-up resistors at SDA and SCL pins should be connected to (TVDD+0.3)V or less voltage.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
(AVSS, HVSS=0V; Note 3)
Parameter
Power Supplies Analog
(Note 7) Digital
Digital I/O
HP-Amp
Difference
RECOMMENDED OPERATING CONDITIONS
Symbol
min
AVDD
2.6
DVDD
2.6
TVDD
1.6
HVDD
2.6
AVDD−DVDD
−0.3
typ
3.3
3.3
3.3
3.3 / 5.0
0
max
3.6
3.6
DVDD
5.25
+0.3
Units
V
V
V
V
V
Note 3. All voltages with respect to ground.
Note 7. The power-up sequence between AVDD, DVDD, TVDD and HVDD is not critical. When AVDD, HVDD or
TVDD is powered OFF, the power supply current of DVDD at power-down mode may be increased. When
AVDD, HVDD or DVDD is powered OFF, the power supply current of TVDD at power-down mode may be
increased. DVDD and TVDD should not be powered OFF while AVDD or HVDD is powered ON.
* AKM assumes no responsibility for the usage beyond the conditions in this datasheet.
MS0543-E-00
-6-
2006/09