AK4522_12 Datasheet, PDF (6/19 Pages) Asahi Kasei Microsystems – 20Bit Stereo ΔΣ ADC & DAC

ASAHI KASEI
[AK4522]
FILTER CHARACTERISTICS
(Ta=25°C; VA=4.5 ∼ 5.5V, VD=2.7 ∼ 5.5V; fs=44.1kHz; DEM0=”1”, DEM1=”0”)
Parameter
Symbol
min
typ
ADC Digital Filter (Decimation LPF):
Passband
(Note 10) -0.005dB
PB
0
-0.02dB
0
-0.06dB
0
-6.0dB
0
Stopband
SB
24.34
Passband Ripple
PR
Stopband Attenuation
SA
80
Group Delay
(Note 11)
GD
29.3
Group Delay Distortion
ΔGD
0
ADC Digital Filter (HPF):
Frequency Response (Note 10) -3dB
FR
0.9
-0.5dB
2.7
-0.1dB
6.0
DAC Digital Filter:
Passband
(Note 10) -0.06dB
PB
0
-6.0dB
0
Stopband
SB
24.1
Passband Ripple
PR
Stopband Attenuation
SA
43
Group Delay
(Note 11)
GD
14.7
DAC Digital Filter + Analog Filter:
Frequency Response: 0 ∼ 20.0kHz
FR
±0.2
max
19.76
20.02
20.20
22.05
±0.005
20.0
22.05
±0.06
Units
kHz
kHz
kHz
kHz
kHz
dB
dB
1/fs
us
Hz
Hz
Hz
kHz
kHz
kHz
dB
dB
1/fs
dB
Note:10. The passband and stopband frequencies scale with fs.
For example, 20.02kHz at -0.02dB is 0.454 x fs. The reference frequency of these responses is 1kHz.
11. The calculating delay time which occurred by digital filtering. This time is from the input of analog signal to
setting the 20bit data of both channels to the output register for ADC.
For DAC, this time is from setting the 20bit data of both channels on input register to the output of analog
signal.
DIGITAL CHARACTERISTICS
(Ta=25°C; VA=4.5 ∼ 5.5V, VD=2.7 ∼ 5.5V)
Parameter
Symbol
min
typ
High-Level Input Voltage (Except CMODE VIH
70%VD
-
pin)
VIL
-
-
Low-Level Input Voltage (Except CMODE
pin)
High-Level Input Voltage (CMODE pin)
VIH
95%VD
-
Low-Level Input Voltage (CMODE pin)
VIL
-
-
Hight-Level Output Voltage (Iout=-80uA)
VOH
VD-0.4
-
Low-Level Output Voltage (Iout=80uA)
VOL
-
-
Input Leakage Current
(Note 12)
Iin
-
-
Note: 12. CMODE pin has internal pull-up and pull-down devices, nominally 50kohm.
Max
-
30%VD
Units
V
V
-
V
10%VD
V
-
V
0.4
V
±10
uA
M0020-E-02
-6-
2012/01