AK8815 Datasheet, PDF (5/37 Pages) Asahi Kasei Microsystems – NTSC/PAL Digital Video Encoder

ASAHI KASEI
[AK8815/16]
A2
IREF
C1
VIDEOOUT
C2
AVDD
A5
XVDD
B2
AVDD
B1
AVSS
D1
DVSS
A6
DVSS
A3
AVSS
F1
DVDD
F9
DVDD
E2
DVSS
E9
DVSS
C8
PVDD1
C9
PVSS1
J3
PVDD2
H2
PVSS2
A4
AVSS
B8
TEST
A8
ATPG
H1
DVDD
J2
UD4
G1
UD3
G2
UD2
E1
UD1
D2
UD0
A1
NC
A9
NC
J1
NC
J9
NC
B4
NC
H6
NC
J8
NC
F2
NC
C3
N.C.
O
IREF output pin. Connect this pin to Analog ground via a 12 Kohm resistor
( better than +/_ 1% accuracy ).
O
Video output pin. Connect this pin to Analog ground via a 390 ohm resistor
resistor ( better than +/_ 1% accuracy ).
P Analog power supply pin.
P Power supply pin for crystal ( for XTAL ).
P Analog power supply pin.
G Analog ground pin.
G Digital ground pin.
G Crystal ground connection pin ( set DVSS [0 V] ).
G Analog ground pin.
P Digital power supply ( digital core power supply )
P Digital power supply ( digital core power supply )
G Digital ground pin ( digital core ground )
G Digital ground pin ( digital core ground )
P
Power supply pin for chip pad.
I / F power supply for CLKOUT, D[7:0], HSYNC, VSYNC
G Ground pin for PVDD1
P
Power supply pin for chip pad.
I / F power supply for PDN, RSTN, SDO, SDI, CS, SCLK.
G Ground pin for PVDD2
G
Ground pin for the substrate biasing
Connect to Analog Ground.
I For normal operation, connect to ground.
I For normal operation, connect to ground.
P Digital power supply
O Test output pin. For normal operation, left un-connected ( NC ).
O Test output pin. For normal operation, left un-connected ( NC ).
O Test output pin. For normal operation, left un-connected ( NC ).
I/O Test I/O pin. For normal operation, left un-connected ( NC ).
I/O Test I/O pin. For normal operation, left un-connected ( NC ).
- NC pin.
- NC pin.
- NC pin.
- NC pin.
- NC pin
- NC pin.
- NC pin.
- NC pin.
- Index pin
MS0331-E-00
5
2004 / 08