AK8180B Datasheet, PDF (4/12 Pages) Asahi Kasei Microsystems – 2.5V, 3.3V LVCMOS 1:9 Clock Fanout Buffer

AK8180B
Absolute Maximum Rating
Over operating free-air temperature range unless otherwise noted ⁽¹⁾
Items
Symbol
Ratings
Unit
Supply voltage
VDD
-0.3 to 4.6
V
Input voltage
Vin
GND-0.3 to VDD+0.3
V
Input current (any pins except supplies)
I_IN
Storage temperature
Tstg
±10
mA
-55 to 130
°C
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond those
indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating
conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
ESD Sensitive Device
This device is manufactured on a CMOS process, therefore, generically susceptible to
damage by excessive static voltage. Failure to observe proper handling and
installation procedures can cause damage. AKM recommends that this device is handled with
appropriate precautions.
Recommended Operation Conditions
Parameter
Symbol
Conditions
Min
Typ
Max Unit
Operating temperature
Ta
-40
85
°C
Supply voltage ⁽¹⁾
VDD VDD±5%
2.375
2.5
2.625
V
3.135
3.3
3.465
(1) Power of 2.5V or 3.3V requires to be supplied from a single source. A decoupling capacitor of 0.01mF for power supply line
should be located close to each VDD pin.
General Specification
Parameter
Output Termination Voltage
ESD Protection 1
ESD Protection 2
Latch-Up Immunity
Power Dissipation Capacitance
Input Capacitance
Symbol
VTT
MM
HBM
LU
Conditions
Machine model
Human Body Model
Per output
Min
200
2000
200
Typ
VDD/2
10
4.0
Max Unit
V
V
V
mA
pF
pF
May-2011
MS1301-E-00
-4-