AK8181A Datasheet, PDF (3/8 Pages) Asahi Kasei Microsystems – 3.3V LVPECL 1:4 Clock Fanout Buffer

AK8181A
Absolute Maximum Rating
Over operating free-air temperature range unless otherwise noted ⁽¹⁾
Supply voltage ⁽²⁾
Input voltage ⁽²⁾
Items
Symbol
Ratings
Unit
VDD
-0.3 to 4.6
V
Vin
-0.3 to VDD+0.3
V
Input current (any pins except supplies)
I_IN
Storage temperature
Tstg
±10
mA
-55 to 130
°C
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond those
indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating
conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
(2) VSS=0V
ESD Sensitive Device
This device is manufactured on a CMOS process, therefore, generically susceptible to
damage by excessive static voltage. Failure to observe proper handling and
installation procedures can cause damage. AKM recommends that this device is handled with
appropriate precautions.
Recommended Operation Conditions
Parameter
Symbol
Conditions
Min
Typ
Max Unit
Operating temperature
Supply voltage ⁽¹⁾
Ta
VDD
VDD±5%
-40
85
°C
3.135
3.3
3.465 V
(1) Power of 3.3V requires to be supplied from a single source. A decoupling capacitor of 0.1μF for power supply line should
be located close to each VDD pin.
Pin Characteristics
Parameter
Input Capacitance
Input Pullup Resistor
Input Pulldown Resistor
Symbol
C_IN
R_PU
R_PD
Conditions
Min
Typ
Max Unit
4
pF
51
kΩ
51
kΩ
MS1342-E-00
-3-
Nov-2011