|
AK1546 Datasheet, PDF (24/39 Pages) Asahi Kasei Microsystems – 3GHz Low Noise Integer-N Frequency Synthesizer | |||
|
◁ |
[AK1546]
CP2[2:0] : Charge pump current setting 2
CP1[2:0] : Charge pump current setting 1
AK1546 provides two setting for charge pump current. They can be set by {CP1} and {CP2}.
The following formula shows the relationship among the resistance value, the register setting and the
electric current that is used for LPF band calculation (tran_Icp).
tran_Icp [A] = Icp_min [A] Ã ({CP1} or {CP2} setting +1)
Charge pump minimum current (Icp_min)[A]
= (0.85Ã1.164Ã15) / Resistance connected to the BIAS pin [â¦]
The following table shows the typical tran_Icp for each status.
D18 D17 D16
D15 D14 D13
000
001
010
011
100
101
110
111
tran_Icp (typical)
Bias Resistance
33 kâ¦
27 kâ¦
22 kâ¦
450
550
675
900
1100
1350
1350
1650
2025
1800
2200
2700
2250
2750
3375
2700
3300
4050
3150
3850
4725
3600
4400
5400
[Unit : μA]
Remarks
The following formula shows the relationship among the resistance value, the register setting and the
electric current that can be measured (Icp).
Charge pump minimum current (Icp_min)[A]
= (1.164Ã15) / Resistance connected to the BIAS pin [â¦]
Charge pump current (Icp) [A] = Icp_min [A] Ã ({CP1} or {CP2} setting +1)
MS1388-E-00
24
2012/3
|
▷ |