|
AK1546 Datasheet, PDF (16/39 Pages) Asahi Kasei Microsystems – 3GHz Low Noise Integer-N Frequency Synthesizer | |||
|
◁ |
[AK1546]
5ï¼Reference counter
The reference input can be set with a dividing number in the range of 1 to 16383 using {R [13:0]}, which is an
14-bit address of {D[13:0]} in <Address0>. 0 cannot be set as a dividing number.
6ï¼Prescaler
The dual modulus prescaler (P/P + 1) and the swallow counter are used to provide a large dividing ratio.
The prescaler is set by {PRE[1:0]}, which is a 2-bit latch of {D[21:20]} in <Address2>.
{PRE[1:0]}=â00Binâ, P=8, Dual modulus prescaler 8/9
{PRE[1:0]}=â01Binâ, P=16, Dual modulus prescaler 16/17
{PRE[1:0]}=â10Binâ, P=32, Dual modulus prescaler 32/33
{PRE[1:0]}=â11Binâ, P=64, Dual modulus prescaler 64/65
The Maximum Allowable Prescaler Output Frequency is 300MHz. âPâ must be set as âRF Input Frequency/P â¤
300MHzâ.
7ï¼Power-down and Power-save mode
It is possible to operate in the power-down or power-save mode if necessary by using the external control pin.
Power On
Follow the power-up sequence.
Normal Operation
[PDN]
âLowâ
âHighâ
âHighâ
âHighâ
<Address2>
{PD2} {PD1}
Function
X
X Power Down
X
0 Normal Operation
VBG & LDO : Power UP
0
1
Synthesizer Circuits : Asynchronous Power Down
VBG & LDO : Power UP
1
1
Synthesizer Circuits : Synchronous Power Down
X : Donât care (â0â is recommended.)
MS1388-E-00
16
2012/3
|
▷ |