|
AK1544 Datasheet, PDF (17/37 Pages) Asahi Kasei Microsystems – 1300MHz Integer-N Frequency Synthesizer | |||
|
◁ |
[AK1544]
5. Reference Input
The reference input could be set to a dividing number in the range of 4 to 16383 using {R1[13:0]}, which is a 14-bit
address of D[13:0] in <Address3>. A dividing number from 0 to 3 could not be set.
6. Prescaler and Swallow Counter
The dual modular prescaler (P/P+1) and the swallow counter are used to provide a large dividing ratio. The prescaler is
set by {PRE[1:0]}, which is a 2-bit address of D[15:14] in <Address3>.
{PRE[1:0]}=â00â: Prohibited
{PRE[1:0]}=â01â: P=16, dividing ratio = 16/17
{PRE[1:0]}=â10â: P=32, dividing ratio = 32/33
{PRE[1:0]}=â11â: P=64, dividing ratio = 64/65
7. Power Save Mode
The AK1544 can be operated in the power-down or power-save mode as necessary by using the external control pins
[PDN1] and [PDN2].
â Power On
See â13. Power-up Sequenceâ. It is necessary to bring [PDN1] to âHighâ first, then [PDN2]. Bringing [PDN1] and [PDN2]
to âHighâ simultaneously is prohibited.
â Normal Operation
Pin name
PDN1
PDN2
State
âLowâ
âLowâ Power down
âLowâ
âHighâ Prohibited
âHighâ
âLowâ Power save Note 1) and Note 2)
âHighâ âHighâ Normal Operation
Note 1) Register setup can be made 50ïs after [PDN1] is set to âHighâ. The charge pump is in the Hi-Z state.
Note 2) Register settings are maintained when [PDN2] is set to âLowâ during normal operation.
MS1350-E-01
17
2013/03
|
▷ |