AD9992_15 Datasheet, PDF (81/92 Pages) Analog Devices – 12-Bit CCD Signal Processor with Precision Timing Generator

Address
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
0x7F
0x80
AD9992
Data Bits
[10]
[11]
[12]
[13]
[14]
[15]
[23:16]
[24]
[25]
[26]
[27]
[7:0]
[11:8]
[15:12]
[19:16]
[23:20]
[12:0]
[25:13]
[12:0]
[25:13]
[12:0]
[25:13]
[12:0]
[25:13]
[12:0]
[25:13]
[12:0]
[25:13]
[12:0]
[25:13]
Default
Value
1
1
Update
Type
1
1
1
1
0
0
0
0
0
0
VD
{0, 0, 0, 0}
{0, 0, 0, 0}
{0, 0, 0, 0}
{0, 0, 0, 0}
0
VD
0
0
VD
0
0
VD
0
0
VD
0
0
VD
0
0
VD
0
0
VD
0
Mnemonic
SEL_GP3
SEL_GP4
SEL_GP5
SEL_GP6
SEL_GP7
SEL_GP8
GPO_OUTPUT_EN
GPO5_OVERRIDE
GPO6_OVERRIDE
GPO7_OVERRIDE
GPO8_OVERRIDE
GP*_USE_LUT
LUT_FOR_GP12
LUT_FOR_GP34
LUT_FOR_GP56
LUT_FOR_GP78
GP1_TOG1_FD
GP1_TOG1_LN
GP1_TOG1_PX
GP1_TOG2_FD
GP1_TOG2_LN
GP1_TOG2_PX
GP1_TOG3_FD
GP1_TOG3_LN
GP1_TOG3_PX
GP1_TOG4_FD
GP1_TOG4_LN
GP1_TOG4_PX
GP2_TOG1_FD
GP2_TOG1_LN
Description
1: GP3 signal is selected for GPO3 output.
1: GP4 signal is selected for GPO4 output.
0: SUBCK is selected.
1: GP5 signal is selected for GPO5 output.
0: XV21 is selected.
1: GP6 signal is selected for GPO6 output.
0: XV22 is selected.
1: GP7 signal is selected for GPO7 output.
0: XV23 is selected.
1: GP8 signal is selected for GPO8 output.
0: XV24 is selected.
1: GPO outputs enabled.
0: GPO is input high-Z state (default).
1: When GPO5 configured as input, overrides internal
OUT_CONT.
1: When GPO6 configured as input, overrides internal
HBLK.
1: When GPO7 configured as input, overrides internal
CLPOB.
1: When GPO8 configured as input, overrides internal
PBLK.
Use result from LUT, or else GP* is unaltered.
Two-input look-up table results.
Examples: {LUT_FOR_GP12} Å [GP2:GP1].
{0, 1, 1, 0} = GP2 XOR GP1; {1, 1, 1, 0} = GP2 OR GP1.
{0, 1, 1, 1} = GP2 NAND GP1; {1, 0, 0, 0} = GP2 AND GP1.
General-Purpose Signal 1, first toggle position, field
location.
General-Purpose Signal 1, first toggle position, line
location.
General-Purpose Signal 1, first toggle position, pixel
location.
General-Purpose Signal 1, second toggle position, field
location.
General-Purpose Signal 1, second toggle position, line
location.
General-Purpose Signal 1, second toggle position, pixel
location.
General-Purpose Signal 1, third toggle position, field
location.
General-Purpose Signal 1, third toggle position, line
location.
General-Purpose Signal 1, third toggle position, pixel
location.
General-Purpose Signal 1, fourth toggle position, field
location.
General-Purpose Signal 1, fourth toggle position, line
location.
General-Purpose Signal 1, fourth toggle position, pixel
location.
General-Purpose Signal 2, first toggle position, field
location.
General-Purpose Signal 2, first toggle position, line
location.
Rev. C | Page 81 of 92