UG-277 Datasheet, PDF (8/24 Pages) Analog Devices – SDP-B Controller Board

UG-277
SDP User Guide
Pin No.
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
Pin Name
GND
PAR_D6
PAR_D8
PAR_D10
PAR_D12
GND
PAR_D15
PAR_D16
PAR_D18
PAR_D20
PAR_D22
GND
VIO (+3.3 V)
GND
GND
NC
NC
Description
Connect to ground plane of board.
Parallel Data Bus Bit 6.
Parallel Data Bus Bit 8.
Parallel Data Bus Bit 10.
Parallel Data Bus Bit 12.
Connect to ground plane of board.
Parallel Data Bus Bit 15.
Parallel Data Bus Bit 16.1 (No connect.)¹
Parallel Data Bus Bit 18.1 (No connect.)¹
Parallel Data Bus Bit 20.1 (No connect.)¹
Parallel Data Bus Bit 22. (No connect.)¹
Connect to ground plane of board.
+3.3 V Output. 20 mA maximum current available to power IO voltage on daughter board.
Connect to ground plane of board.
Connect to ground plane of board.
No Connect. Leave this pin unconnected. Do not ground.
No Connect. Leave this pin unconnected. Do not ground.
1 _{Functionality not implemented on the SDP board.}
2 _{Shared across both connectors.}
Each interface provided by the SDP-B is available on unique pins of the SDP-B 120-pin connector. The connector pin numbering scheme
is outlined in Figure 3.
Rev. B | Page 8 of 24