UG-277 Datasheet, PDF (1/24 Pages) Analog Devices – SDP-B Controller Board

SDP User Guide
UG-277
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
SDP-B Controller Board
INTRODUCTION
This user guide describes the EVAL-SDP-CB1Z system
demonstration platform—Blackfin® (SDP-B) controller board
from Analog Devices, Inc. The SDP-B controller board is part
of the Analog Devices system demonstration platform (SDP).
The SDP consists of a series of controller boards, interposer
boards, and daughter boards.
SDP controller boards provide a means of communicating with
the PC from the system under evaluation. Interposer boards
route signals between two connectors. Daughter boards are a
collection of product evaluation boards and Circuits from the
Lab™ reference circuit boards. The SDP-B is used as part of the
evaluation system for many Analog Devices components and
reference circuits. The primary audience for this user guide is a
system engineer who seeks to understand how to set up the
SDP-B board and begin USB communications to the PC.
The SDP-B board is designed to be used in conjunction with
various Analog Devices component evaluation boards and
Circuits from the Lab reference circuits as part of a customer
evaluation environment. The SDP-B provides USB connectivity
through a USB 2.0 high speed connection to the computer
allowing users to evaluate components on this platform from a
PC application. The SDP-B is based on ADSP-BF527 Blackfin
processor, with the Blackfin processor peripheral communi-
cation lines available to the component daughter board through
two identical 120-pin small footprint connectors.
The SDP-B user guide provides instructions for installing the
SDP-B hardware (EVAL-SDP-CB1Z board) and software onto
your computer. The necessary installation files are provided
with the evaluation daughter board package. The Getting
Started section provides software and hardware installation
procedures, PC system requirements, and basic board informa-
tion. The Hardware Description section provides information
on the EVAL-SDP-CB1Z components. The EVAL-SDP-CB1Z
schematics are provided in the Schematics section.
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. B | Page 1 of 24