UG-277 Datasheet, PDF (11/24 Pages) Analog Devices – SDP-B Controller Board

SDP User Guide
5.9mm
3.3mm
UG-277
DAUGHTERBOARD A
DAUGHTERBOARD B
3.3mm
5.9mm
Figure 4. Maximum Board Dimensions for Connector Placement
The full specification drawing for the connector location on the daughter board can be seen in Figure 5.
1.75mm
5.90mm
ORIGIN (0,0)
3.30mm
NO RIGHT-ANGLED CONNECTORS ALLOWED ALONG THIS EDGE
5.15mm
60
x = 5.9mm, y = –3.3mm
61
D3.10mm
50.50mm
x = 5.95mm, y = –28.55mm (CENTER OF CONNECTOR)
EVAL-xxxxx-DB
1
120
Rev. D
x = 5.95mm, y = –53.8mm
D3.10mm
PLACEMENT KEEPOUT FOR COMPONENTS
OVER 3mm IN HEIGHT
(EXTENDS DOWN ENTIRE HEIGHT OF LEFT HAND SIDE OF PCB)
12.65mm
Figure 5. Connector Placement on Compatible Daughter Boards
Rev. B | Page 11 of 24