HMC6301 Datasheet, PDF (8/24 Pages) Analog Devices – Programmable baseband gain and filter bandwidth

HMC6301
Pin No.
C9 to C12
D9 to D12
E1
E10, E11
E12
F9, G12
F10, F11
F12
G1
G3
G5
G6
G7, G8, H6, H9 to H12
G9, G10
G11
H2
H3
H4
H7
H8
Mnemonic
VSSDIV
VSSLPF
RFIN
VSSCP
REFCLKP
VDDSYN
VSSREF
REFCLKN
ANACTRLLNA
VCCMIX
VCCTRIP
VREGOUT
VSSVCO
VCCVCO
VCCRCAP
VCOLNA
VCCIF
ACTLIFVGA
EXTLO_N
EXTLO_P
Data Sheet
Description
Digital Ground for the Synthesizer Divider.
Digital Ground for the Synthesizer Low-Pass Filter.
Radio Frequency Input. This pin is ac-coupled and matched to 50 Ω.
Digital Ground for the Synthesizer Charge Pump.
External Reference Clock (Positive). This pin can be dc or ac matched to 50 Ω.
Power Supply for the Synthesizer (1.3 V dc).
Digital Ground for the Synthesizer Reference.
External Reference Clock (Negative). This pin can be dc or ac matched to 50 Ω.
Analog Gain Control for the Low Noise Amplifier. Leave this pin floating for digital control.
Power Supply for the Mixer (2.7 V dc).
Power Supply for the Tripler (2.7 V dc).
Regulator Output for the Voltage Controlled Oscillator.
Digital Ground to the Synthesizer Voltage Controlled Oscillator.
Power Supply for the Voltage Controlled Oscillator (2.7 V dc).
External Capacitor Connection for the Voltage Controlled Oscillator Regulator.
Power Supply for the Low Noise Amplifier (2.8 V dc).
Power Supply for the Intermediate Frequency (2.8 V dc).
Analog Gain Control for the IF Variable Gain Amplifier. Leave this pin floating for digital control.
External Local Oscillator (Negative) Input.
External Local Oscillator (Positive) Input.
Rev. A | Page 8 of 24