HMC6301 Datasheet, PDF (3/24 Pages) Analog Devices – Programmable baseband gain and filter bandwidth

Data Sheet
HMC6301
SPECIFICATIONS
TA = 25°C, reference frequency = 71.4286 MHz, gain settings = maximum, IF bandwidth = maximum, input impedance = 50 Ω single
ended, output impedance = 100 Ω differential, unless otherwise noted.
ELECTRICAL SPECIFICATIONS
Table 1.
Parameter
FREQUENCY RANGE
FREQUENCY STEP SIZE
MODULATION BANDWIDTH
GAIN
Maximum Receiver Gain
Minimum Receiver Gain
Baseband Gain Control
IF Gain Control (Analog/Digital)
LNA Gain Control (Analog/Digital)
NOISE FIGURE
INPUT
For 1 dB Compression (P1dB)
Third-Order Intercept (IP3)
TEMPERATURE SENSOR RANGE
SUPPRESSION AND REJECTION
Image Rejection (3 × LO − IF)
Sideband Suppression (I/Q Balance)
PHASE
Phase Noise
@ 100 kHz Offset
@1 MHz Offset
@ 10 MHz Offset
@ 100 MHz Offset
Phase-Locked Loop (PLL) Bandwidth
POWER DISSIPATION
Single-Ended
External LO
Test Conditions/Comments
With 71.4286 MHz reference clock
With 142.857 MHz reference clock
With 154.2857 MHz reference clock
Maximum bandwidth setting
3 dB bandwidth
5 dB bandwidth
High and low gain settings
At maximum gain
Minimum LNA gain
Four levels
Using internal filter
Min Typ
57
250
500
540
Max Unit
64
GHz
MHz
MHz
MHz
1.4
GHz
1.8
GHz
63
69
dB
0
dB
41
dB
12/15
dB
20/20
dB
8
13.5 dB
−19
−9
−40
dBm
dBm
+85 °C
>35
dBc
20
23
dBc
−75
−93
−114
−122
300
0.82
0.57
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
kHz
W
W
Rev. A | Page 3 of 24