SW06 Datasheet, PDF (5/12 Pages) Analog Devices – Quad SPST JFET Analog Switch

SW06
ABSOLUTE MAXIMUM RATINGS¹
Operating Temperature Range
SW06BQ, BRC . . . . . . . . . . . . . . . . . . . –55°C to +125°C
SW06FQ . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
SW06GP, GS . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . . +300°C
Maximum Junction Temperature . . . . . . . . . . . . . . . . +150°C
V+ Supply to V– Supply . . . . . . . . . . . . . . . . . . . . . . . +36 V
V+ Supply to Ground . . . . . . . . . . . . . . . . . . . . . . . . . +36 V
Logic Input Voltage . . . . . . . . . . . (–4 V or V–) to V+ Supply
Analog Input Voltage Range
Continuous . . . . . . . . . . . . . V– Supply to V+ Supply +20 V
Maximum Current Through
Any Pin Including Switch . . . . . . . . . . . . . . . . . . . . . 30 mA
Package Type
␪_JA2
16-Pin Hermetic DIP (Q)
100
16-Pin Plastic DIP (P)
82
20-Contact LCC (RC)
98
16-Pin SOL (S)
98
␪_JC
Units
16
°C/W
39
°C/W
38
°C/W
30
°C/W
NOTES
1_{Absolute maximum ratings apply to both DICE and packaged parts, unless}
otherwise noted.
2_{θJA is specified for worst case mounting conditions, i.e., θJA is specified for device}
in socket for Cerdip, P-DIP, and LCC packages; θ_JA is specified for device soldered
to printed circuit board for SO package.
Model
SW06BQ
SW06BRC
SW06FQ
SW06GP
SW06GS
Disable
Input
0
1 or NC
1 or NC
ORDERING GUIDE
Temperature
Range
Package
Description
–55°C to +125°C
–55°C to +125°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Cerdip
LCC
Cerdip
Plastic DIP
SOL
Package
Option
Q-16
E-20A
Q-16
N-16
R-16
TRUTH TABLE
Logic
Input
Switch State
Channels
Channels
1&2
3&4
X
OFF
0
OFF
1
ON
OFF
ON
OFF
PIN CONNECTIONS
16-Pin DIP (Q or P-Suffix)
16-Pin SOL (S-Suffix)
DICE CHARACTERISTICS
Die Size 0.101 × 0.097 inch, 9797 sq. mils
(2.565 × 2.464 mm, 6320 sq. mm)
SW06BRC/883
LCC Package
(RC-Suffix)
REV. A
–5–