SSM2932 Datasheet, PDF (5/16 Pages) Analog Devices – High Efficiency, Ground-Referenced

Data Sheet
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
Analog Supply Voltage (PVDD)
Input Voltage
Output ESD, Human Body Model
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
Rating
3.75 V
1.8 VPEAK
8 kV
−65°C to +150°C
−40°C to +85°C
−65°C to +165°C
300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
SSM2932
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 4. Thermal Resistance
Package Type
16-Ball, 1.64 mm × 1.64 mm WLCSP
θJA
Unit
66
°C/W
ESD CAUTION
Rev. 0 | Page 5 of 16