OP215 Datasheet, PDF (4/8 Pages) Analog Devices – Dual Precision JFET-Input Operational Amplifier

OP215
ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage
OP215E, OP215G . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Operating Temperature Range
OP215E . . . . . . . . . . . . . . . . . . . . . . . . . . . . +0∞C to +70∞C
OP215G . . . . . . . . . . . . . . . . . . . . . . . . . . . –40∞C to +85∞C
Maximum Junction Temperature (T_j) . . . . . . . . . . . . . . 150∞C
Differential Input Voltage
OP215E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 40 V
OP215G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 30 V
Input Voltage²
OP215E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 V
OP215G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 16 V
Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range . . . . . . . . . . . . –65∞C to +150∞C
Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . . . 300∞C
Junction Temperature (T_j) . . . . . . . . . . . . . –65∞C to +150∞C
NOTES
1_{Absolute maximum ratings apply to packaged parts, unless otherwise noted.}
2_{Unless otherwise specified, the absolute maximum negative input voltage is equal}
to one volt more positive than the negative power supply voltage.
Package Type
␪_JA *
␪_JC
Unit
8-Lead Hermetic DIP (Z) 134
12
∞C/W
8-Lead Plastic DIP (P)
96
37
∞C/W
*␪_JA is specified for worst-case mounting conditions, i.e., ␪_JA is specified for
device in socket for CerDIP and P-DIP packages.
PIN CONFIGURATION
OUT A 1
8 V+
–IN A
2
AB
–++–
7 OUT B
+IN A 3
6 –IN B
V– 4
5 +IN B
Model
OP215EZ²
OP215GP²
ORDERING INFORMATION¹
Package
Type
Temperature
Range
8-Lead CerDIP
COM
8-Lead Plastic DIP XIND
T_A = 25∞C,
V_OS Max (mV)
1.0
6.0
For military processed devices, please refer to the standard microcircuit drawing
(SMD) available at www.dscc.dla.mil/programs/milspec/default.asp
SMD Part Number
ADI Equivalent
5962-8853801GA²
5962-8853801PA
5962-8838032A²
OP215AJMDA
OP215AZMDA
OP215BRCMDA
NOTES
1_{Burn-in is available on commercial and industrial temperature range parts in CerDIP and plastic}
DIP packages.
2_{Not for new design, obsolete April 2002.}
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the OP215 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–4–
REV. A