EVAL-AD7902SDZ Datasheet, PDF (4/32 Pages) Analog Devices – On-board reference

UG-608
GETTING STARTED
SOFTWARE INSTALLATION PROCEDURES
Download the evaluation board software from the AD7902
product page on the Analog Devices website, at
www.analog.com.
There are two parts to the installation:
• AD7902 evaluation board software installation
• EVAL-SDP-CB1Z system demonstration platform board
drivers installation
Warning
Install the evaluation board software and drivers before
connecting the evaluation board and EVAL-SDP-CB1Z board to
the USB port of the PC to ensure that the evaluation system is
correctly recognized when it is connected to the PC.
Installing the AD7902 Evaluation Board Software
To install the AD7902 evaluation board software,
1. Start the Windows operating system and download the
software from the AD7902 product page on the Analog
Devices website, at www.analog.com.
2. Unzip the downloaded file.
3. Double-click the setup.exe file to begin the evaluation
board software installation (see Figure 2).
EVAL-AD7902SDZ User Guide
4. Select the location to install the software, and then click
Next. (The default location is C:\Program Files (x86)\
Analog Devices\AD7902_03 Evaluation Software\.
This location also contains the executable software and
example files.)
Figure 3. AD7902 Evaluation Board Software Installation:
Selecting the Location for Software Installation
(the Default Location Is Shown)
5. A license agreement appears. Read the agreement, and then
select I accept the License Agreement and click Next.
Figure 2. AD7902 Evaluation Board Software Installation: Installation Begins
Figure 4. AD7902 Evaluation Board Software Installation:
Accepting the License Agreement
Rev. 0 | Page 4 of 32