EVAL-AD7902SDZ Datasheet, PDF (16/32 Pages) Analog Devices – On-board reference

UG-608
GENERATING A WAVEFORM ANALYSIS REPORT
Figure 22 illustrates the Waveform tab for a 10 kHz sine wave
input signal when the on-board 5 V external reference is used.
EVAL-AD7902SDZ User Guide
The Waveform Analysis area (located toward the bottom of the
window) reports the amplitudes recorded from the captured signal
and the frequency of the signal tone. Select the Channel 1 tab
or Channel 2 tab in the Waveform Analysis area to view the
corresponding waveform.
CONTROL CONTROL CONTROL
CURSOR ZOOMING PANNING
Figure 22. Waveform Tab
Rev. 0 | Page 16 of 32