EVAL-AD7902SDZ Datasheet, PDF (3/32 Pages) Analog Devices – On-board reference

EVAL-AD7902SDZ User Guide
GENERAL DESCRIPTION
The EVAL-AD7902SDZ is an evaluation board designed to
demonstrate the low power AD7902 performance and to
provide an easy to understand interface for a variety of system
applications. The AD7902 is a dual pseudo differential 16-bit,
1 MSPS PulSAR® ADC. A full description of the AD7902 is
available in the AD7902 data sheet and should be consulted
when using this evaluation board.
The evaluation board is ideal for use with the Analog Devices, Inc.,
system demonstration platform (SDP) board, EVAL-SDP-CB1Z.
The evaluation board interfaces to the SDP board via a 120-pin
UG-608
connector. SMA Connectors J6, J10, J14, and J15 are provided
to connect a low noise analog signal source.
The user PC software executable controls the evaluation board
over the USB through the SDP board, EVAL-SDP-CB1Z.
On-board components include the following:
ADR435: high precision, buffered band gap 5.0 V reference
AD8031: reference buffer
ADA4841-1: signal conditioning circuit with op amps
ADP7104 and ADP2301: regulators to derive necessary voltage
levels on board
Rev. 0 | Page 3 of 32