EVAL-AD7403FMCZ Datasheet, PDF (4/20 Pages) Analog Devices – Full featured evaluation board

UG-683
SOFTWARE INSTALLATION PROCEDURES
The EVAL-AD7403FMCZ evaluation kit includes a CD
containing evaluation software to be installed on your PC
before you begin using the evaluation board.
There are two parts to the installation:
• EVAL-AD7403FMCZ evaluation software installation
• EVAL-SDP-CH1Z driver installation
Warning
The evaluation board software and drivers must be installed
before connecting the evaluation board and EVAL-SDP-CH1Z
board to the USB port of the PC to ensure that the evaluation
system is correctly recognized when it is connected to the PC.
Installing the EVAL-AD7403FMCZ Evaluation Board
Software
To install the EVAL-AD7403FMCZ evaluation board software,
1. Insert the included evaluation software installation CD into
the CD drive of a Windows-based PC, and open the
contents of the CD.
2. Double-click the setup.exe file to begin the installation. By
default, the software is saved to the following location:
C:\Program Files\Analog Devices\AD7403\
3. A dialog box appears asking for permission to allow the
program to make changes to your computer. Click Yes to
begin the installation process.
EVAL-AD7403FMCZ User Guide
4. Select the location to install the software, and then click Next.
Figure 4. Evaluation Software Installation—Destination Directory
5. A license agreement appears. Read the agreement, and then
select I accept the License Agreement and click Next.
Figure 3. Evaluation Software Installation—User Account Control
Figure 5. Evaluation Software Installation—Accepting the License Agreement
6. A summary of the installation is displayed. Click Next to
continue.
Figure 6. Evaluation Software Installation—Start Installation
Rev. 0 | Page 4 of 20