EVAL-AD7403FMCZ Datasheet, PDF (14/20 Pages) Analog Devices – Full featured evaluation board

UG-683
GENERATING A WAVEFORM ANALYSIS REPORT
Figure 17 illustrates the tab used for a waveform capture.
Click Single Capture or Continuous Capture (labeled 1 in
Figure 17) to capture samples from the ADC and graph the
resulting waveform.
Graph controls (labeled 2 in Figure 17) are located above the
graph and can be used to pan and zoom into particular areas of
EVAL-AD7403FMCZ User Guide
the graph (see the Graph Tools section and Figure 16 for more
information).
The Waveform Analysis area (labeled 3 in Figure 17) shows
statistics pertaining to the captured waveform, such as
maximum, minimum, and mean amplitudes and signal
frequency.
Figure 17. Waveform Capture Tab
Rev. 0 | Page 14 of 20