RT3PE3000L-1FG484B Datasheet, PDF (44/144 Pages) Actel Corporation – Radiation-Tolerant ProASIC3 Low-Power Space- Flight Flash FPGAs

Radiation-Tolerant ProASIC3 FPGAs
Timing Characteristics
1.2 V DC Core Voltage
Table 2-32 • 3.3 V LVTTL / 3.3 V LVCMOS Low Slew
Military-Case Conditions: T_J = 125°C, Worst-Case V_CC = 1.14 V, Worst-Case V_CCI = 3.0 V
Drive
Speed
Strength Grade t_DOUT t_DP t_DIN t_PY t_PYS t_EOUT t_ZL t_ZH t_LZ t_HZ t_ZLS t_ZHS
4 mA
Std. 0.80 6.03 0.05 1.74 2.39 0.52 6.14 4.84 2.66 2.42 8.35 7.06
Units
ns
–1 0.68 5.13 0.05 1.48 2.03 0.44 5.22 4.12 2.27 2.06 7.11 6.00 ns
8 mA
Std. 0.80 4.93 0.05 1.74 2.39 0.52 5.02 4.14 3.01 3.03 7.23 6.35 ns
–1 0.68 4.19 0.05 1.48 2.03 0.44 4.27 3.52 2.56 2.58 6.15 5.40 ns
12 mA
Std. 0.80 4.15 0.05 1.74 2.39 0.52 4.22 3.61 3.24 3.43 6.44 5.82 ns
–1 0.68 3.53 0.05 1.48 2.03 0.44 3.59 3.07 2.76 2.92 5.47 4.95 ns
16 mA
Std. 0.80 3.92 0.05 1.74 2.39 0.52 3.99 3.49 3.29 3.54 6.21 5.71 ns
–1 0.68 3.34 0.05 1.48 2.03 0.44 3.40 2.97 2.80 3.01 5.28 4.85 ns
24 mA
Std. 0.80 3.81 0.05 1.74 2.39 0.52 3.88 3.51 3.35 3.92 6.09 5.72 ns
–1 0.68 3.24 0.05 1.48 2.03 0.44 3.30 2.98 2.85 3.34 5.18 4.87 ns
Note: For specific junction temperature and voltage supply levels, refer to Table 2-5 on page 2-8 for derating
values.
Table 2-33 • 3.3 V LVTTL / 3.3 V LVCMOS High Slew
Military-Case Conditions: T_J = 125°C, Worst-Case V_CC = 1.14 V, Worst-Case V_CCI = 3.0 V
Drive
Speed
Strength Grade t_DOUT t_DP t_DIN t_PY t_PYS t_EOUT t_ZL t_ZH t_LZ t_HZ t_ZLS t_ZHS
4 mA
Std. 0.80 3.39 0.05 1.74 2.39 0.52 3.45 2.60 2.66 2.56 5.67 4.81
Units
ns
–1 0.68 2.89 0.05 1.48 2.03 0.44 2.94 2.21 2.27 2.18 4.82 4.10 ns
8 mA
Std. 0.80 2.79 0.05 1.74 2.39 0.52 2.84 2.08 3.02 3.18 5.05 4.30 ns
–1 0.68 2.37 0.05 1.48 2.03 0.44 2.42 1.77 2.57 2.70 4.30 3.65 ns
12 mA
Std. 0.80 2.45 0.05 1.74 2.39 0.52 2.49 1.83 3.24 3.58 4.71 4.05 ns
–1 0.68 2.08 0.05 1.48 2.03 0.44 2.12 1.56 2.76 3.04 4.00 3.44 ns
16 mA
Std. 0.80 2.39 0.05 1.74 2.39 0.52 2.43 1.79 3.30 3.69 4.65 4.00 ns
–1 0.68 2.03 0.05 1.48 2.03 0.44 2.07 1.52 2.80 3.14 3.95 3.40 ns
24 mA
Std. 0.80 2.41 0.05 1.74 2.39 0.52 2.46 1.72 3.35 4.08 4.67 3.94 ns
–1 0.68 2.05 0.05 1.48 2.03 0.44 2.09 1.47 2.85 3.47 3.97 3.35 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-5 on page 2-8 for derating
values.
2-32
Advance v0.1