D2F_12 Datasheet, PDF (4/6 Pages) Omron Electronics LLC – Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability

D2F
Ultra Subminiature Basic Switch
Dimensions (Unit: mm) /Operating Characteristics
The following illustrations and drawings are for D2F models with PCB terminals (straight). Self-clinching, solder, compact solder, and right-angled, left angled terminals
are omitted from the following drawings. Refer to the previous page for these terminals.
When ordering, replace @ with the code for the terminal that you need. See the "List of Models" for available combinations of models.
●Pin Plunger Models
D2F@
D2F-01@
D2F-F@
D2F-01F@
D
2
F
1.2 ^12.7
2.2⁺_00.12 dia.
5.2
A
2⁺_00.12
2^+00.12 dia. holes
5.7
PT
2.9
5 ^OP
0.4
5.8±0.15
Operating
Characteristics
Model D2F-@
D2F-01@
D2F-F@
D2F-01F@
Operating Force
Releasing Force
OF Max. 1.47 N {150 gf} 0.74 N {75 gf}
RF Min. 0.20 N {20 gf} 0.05 N {5 gf}
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
0.5 mm
0.25 mm
0.12 mm
0.5 mm
0.25 mm
0.12 mm
Operating Position OP
5.5±0.3 mm
●Hinge Lever Models
D2F-L@
D2F-01L@
D2F-FL@
D2F-01FL@
12.⁸
(10.8)
A
t=0.3 *
3
FP
OP
* Stainless-steel lever
Operating
Characteristics
Model D2F-L@
D2F-01L@
D2F-FL@
D2F-01FL@
Operating Force
Releasing Force
OF Max. 0.78 N {80 gf} 0.25 N {25 gf}
RF Min. 0.05 N {5 gf} 0.02 N {2 gf}
Overtravel
OT Min.
Movement Differential MD Max.
0.55 mm
0.5 mm
0.55 mm
0.5 mm
Free Position
FP Max.
Operating Position OP
10 mm
6.8±1.5 mm
●Simulated Roller Lever Models (R1.3)
D2F-L3@
D2F-01L3@
D2F-FL3@
D2F-01FL3@
12.7
(7.5)
A
10
2.1
R1.3
FP
OP
t=0.3 *
3
Operating
Characteristics
Model _D2F-L3@
D2F-FL3@
D2F-01L3@ D2F-01FL3@
Operating Force
Releasing Force
OF Max. 0.78 N {80 gf} 0.39 N {40 gf}
RF Min. 0.05 N {5 gf} 0.02 N {2 gf}
Overtravel
OT Min.
Movement Differential MD Max.
0.5 mm
0.45 mm
0.5 mm
0.45 mm
Free Position
FP Max.
Operating Position OP
13 mm
8.5±1.2 mm
* Stainless-steel lever
●Simulated Roller Lever Models (R2.5)
D2F-L30@
D2F-01L30@
D2F-FL30@
12.7
D2F-01FL30@
3.3 R2.5 ^A
t=0.3 *
3
OP ^FP
* Stainless-steel lever
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
Operating
Characteristics
Model D2F-L30@ D2F-FL30@
D2F-01L30@ D2F-01FL30@
Operating Force
Releasing Force
OF Max. 0.54 N {55 gf} 0.3 N {31 gf}
RF Min. 0.04 N {4 gf} 0.02 N {2 gf}
Overtravel
OT Min.
Movement Differential MD Max.
0.5 mm
0.5 mm
0.5 mm
0.5 mm
Free Position
FP Max.
Operating Position OP
12.6 mm
9.5±1.0 mm
4