D2F_12 Datasheet, PDF (3/6 Pages) Omron Electronics LLC – Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability

D2F
Ultra Subminiature Basic Switch
Item
Model
D2F-01 models
D2F-F models
D2F models
Between terminals of the same
polarity
600 VAC 50/60 Hz for 1min
Dielectric
strength
Between current-carrying metal
parts and ground
1,500 VAC 50/60 Hz for 1min
Between each terminal and
non-current-carrying metal parts
1,500 VAC 50/60 Hz for 1min
Vibration
resistance * 1
Malfunction
10 to 55 Hz, 1.5-mm double amplitude
Shock
resistance
Durability
Malfunction * 1
1,000 m/s² {approx. 100G} max.
300 m/s² {approx. 30G} max.
Mechanical
1,000,000 operations min. (60 operations/min)
D
Durability * 2
Electrical
100,000 operations min.
(30 operations/min)
30,000 operations min.
(30 operations/min)
2
F
Degree of protection
IEC IP40
Ambient operating temperature
-25°C to +85°C (at ambient humidity 60% max.)
(with no icing or condensation)
Ambient operating humidity
85% max. (for +5°C to +35°C)
Weight
Approx. 0.5 g (pin plunger models)
Note. The data given above are initial values.
*1. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever.
Close or open circuit of the contact is 1ms max.
*2. For testing conditions, consult your OMRON sales representative.
Terminals/Appearances (Unit: mm)
●PCB terminals (Straight)
1.5
3.5
3.15
6.5±0.1
0.9
5.08
5.08
12.8±0.15
0.4
5.8±0.15
●PCB terminals (Right-angled)
●Self-clinching PCB terminals
3.15
6.5±0.1
5.08
5.08
12.8±0.15
1.5
3.4
0.9 0.4±0.05
1.25±0.15
5.8±0.15
<PCB Mounting Dimensions (Reference)>
1.6±0.15
5.8±0.15
5.08±0.1
12.8±0.15
3-1.2 dia. holes
1.5
●PCB terminals (Left-angled)
3.15
6.5±0.1
5.08
5.08
12.8±0.15
●Solder terminals
1.5
0.9
2.6±0.2
5.8±0.15
0.4
3.1±0.2
3.15
6.5±0.1
5.08
5.08
12.8±0.15
●Compact solder terminals
1.5
2.6±0.2
0.9
0.4
5.8±0.15
3.1±0.2
2
3.15
0.5
6.5±0.1
5.08
5.08
12.8±0.15
1.5
3.5
1.2
2.2
0.4
5.8±0.15
Mounting Holes (Unit: mm)
2-2 dia. mounting holes
6.5±0.15
3.15
6.5±0.1
3−0.8 dia. holes
5.08
5.08
12.8±0.15
1.5 _2.4
1.6
0.4
5.8±0.15
3