D2F_12 Datasheet, PDF (2/6 Pages) Omron Electronics LLC – Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability

D2F
Ultra Subminiature Basic Switch
Actuator
Hinge roller
lever
Simulated roller
lever (R1.3)
D
2
F
Simulated roller
lever (R2.5)
Ratings
Maximum Operating Force (OF)
Terminals
PCB terminals (Standard)
Self-clinching PCB terminals
PCB terminals (Right-angled)
PCB terminals (Left-angled)
Solder terminals
Compact solder terminals
PCB terminals (Standard)
Self-clinching PCB terminals
PCB terminals (Right-angled)
PCB terminals (Left-angled)
Solder terminals
Compact solder terminals
PCB terminals (Standard)
Self-clinching PCB terminals
PCB terminals (Right-angled)
PCB terminals (Left-angled)
Solder terminals
Compact solder terminals
Contact Form
●SPDT
COM NO NC
Ratings
3A
General Purpose
1.47 N {150 gf}
D2F-L2
D2F-L2-T
D2F-L2-A
D2F-L2-A1
D2F-L2-D3
D2F-L2-D
D2F-L3
D2F-L3-T
D2F-L3-A
D2F-L3-A1
D2F-L3-D3
D2F-L3-D
D2F-L30
D2F-L30-T
D2F-L30-A
D2F-L30-A1
D2F-L30-D3
D2F-L30-D
1A
Low Operating Force
0.74 N {75 gf}
D2F-FL2
D2F-FL2-T
D2F-FL2-A
D2F-FL2-A1
D2F-FL2-D3
D2F-FL2-D
D2F-FL3
D2F-FL3-T
D2F-FL3-A
D2F-FL3-A1
D2F-FL3-D3
D2F-FL3-D
D2F-FL30
D2F-FL30-T
D2F-FL30-A
D2F-FL30-A1
D2F-FL30-D3
D2F-FL30-D
0.1 A
General Purpose
1.47 N {150 gf}
Low Operating Force
0.74 N {75 gf}
D2F-01L2
D2F-01L2-T
D2F-01L2-A
D2F-01L2-A1
D2F-01FL2
D2F-01FL2-T
D2F-01FL2-A
D2F-01FL2-A1
D2F-01L2-D3
D2F-01L2-D
D2F-01L3
D2F-01L3-T
D2F-01L3-A
D2F-01L3-A1
D2F-01L3-D3
D2F-01L3-D
D2F-01L30
D2F-01L30-T
D2F-01L30-A
D2F-01L30-A1
D2F-01L30-D3
D2F-01L30-D
D2F-01FL2-D3
D2F-01FL2-D
D2F-01FL3
D2F-01FL3-T
D2F-01FL3-A
D2F-01FL3-A1
D2F-01FL3-D3
D2F-01FL3-D
D2F-01FL30
D2F-01FL30-T
D2F-01FL30-A
D2F-01FL30-A1
D2F-01FL30-D3
D2F-01FL30-D
Contact Specifications
Item
Model D2F models
D2F-01 models
Contact
Specifications
Material
Crossbar
Silver alloy
Gold alloy
Gap (standard value)
0.25 mm
Minimum applicable load (see note) * 100 mA at 5 VDC 1 mA at 5 VDC
* Please refer to "Using Micro Loads" in "Precautions" for more information
on the minimum applicable load.
Model
Maximum Operating
Force (OF)
Rated voltage
125 VAC
30 VDC
D2F models
D2F-01 models
1.47N (General-purpose) 0.74N (Low Operating Force) 1.47N (General-purpose) 0.74N (Low Operating Force)
Resistive load
3A
1A
-
2A
0.5 A
0.1 A
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency: 30 operations/min
Approved Safety Standard
The items shown in the "List of Models" above are not standard approved models.
Consult your OMRON sales representative for specific models with standard approvals.
UL (UL1054) /CSA (CSA C22.2 No.55)
Rated voltage
125 VAC
30 VDC
Model
D2F (General-purpose)
3A
2A
D2F (Low operating force)
1A
0.5 A
D2F-01
-
0.1 A
Characteristics
Item
Permissible operating speed
Permissible
operating
frequency
Mechanical
Electrical
Insulation resistance
Contact resistance (initial value)
Model
D2F-01 models
D2F-F models
D2F models
Pin plunger models: 1 mm to 500 mm/s,
Lever models: 5 mm to 500 mm/s
Pin plunger models: 200 operations/min,
Lever models: 100 operations/min
30 operations/min
100 MΩ min. (at 500 VDC with insulation tester)
100 mΩ max.
50 mΩ max.
30 mΩ max.
2