Z8F083A0128ZCOG Datasheet, PDF (9/14 Pages) Zilog, Inc. – Up to 8 KB Flash memory with in-circuit programming capability

Z8 Encore!^® F083A Series Development Kit
User Manual
6
MCU
The Z8 Encore! F083A Series MCU is member of a family of Zilog^®
microcontroller products based upon the 8-bit eZ8 core CPU. The Flash
in-circuit programming capability allows for faster development time and
program changes in the field. The eZ8 core CPU is upward compatible
with existing Z8^® instructions. The successive approximation register
(SAR) ADC on the Z8 Encore! F083A is one of the fastest 10-bit ADCs
available in a 28-pin or smaller package. The Z8 Encore! F083A is built
for speed to handle rigorous application requirements for motor control,
sensor interfacing, ballast control, and appliance controls.
The development board contains circuitry to support and present all the
features of the Z8 Encore! F083A Series. For more information on the
Z8 Encore!^® family of devices, refer to Z8 Encore!^® F083A Series
Product Specification (PS0263) available for download at
www.zilog.com.
Jumper Settings
The only jumper available on the Z8 Encore! F083A development board
is JP5, which affects U5 RESET/PD0. Set JP5 as follows:
• JP5 OUT (default): PD0 (GPIO)
• JP5 IN: RESET when SW1 pressed
External Interface Headers JP1 and JP2
Figure 2 on page 8 displays the external interface headers JP1 and JP2.
UM020604-0508
Z8 Encore!^® F083A Series