Z86L98ZEM Datasheet, PDF (6/10 Pages) Zilog, Inc. – Z8 In-Circuit Emulator

Z86L98 ZEM
Z8 In-Circuit Emulator
4
Emulator Kit Contents
The emulator kit contains one of each of the following items:
• Z86L98 Emulator board
• Z86D86 28 PDIP program platform ZiLOG PC: 99C0667-001
• Z86D86 28 SOIC program platform ZiLOG PC: 99C0668-001
• Z86D73 40 PDIP program platform ZiLOG PC: 99C0669-001
• Z86D73 44 PLCC program platform ZiLOG PC: 99C0670-001
• Z86D73 44 QFP program platform ZiLOG PC: 99C0671-001
• 40 PDIP emulation pod with cable ZiLOG PC: 93C0024-001
• 28 PDIP emulation pod ZiLOG PC: 99C0473-001
• 44 PLCC emulation pod ZiLOG PC: 99C0273-001
• Power Cable with Banana Plugs
• RS-232 Serial Cable, 9-pin male and 25-pin female
• ZiLOG Developer Studio Installation CD
• Z86L98 Emulator UserÕs Manual
• ZiLOG Developer Studio Manual contained on the ZDS installation CD-
ROM.
If the ZDS CD-ROM does not contain the manual it can be
downloaded from the ZiLOG website at www.zilog.com.
Additional Items Required
The following item is required but is not currently supplied in the emulator kit:
• Power source (+5VDC typical) for the emulator. This can be a laboratory
power supply with a current rating of at least 1.5 ampere.
Optional Recommended Items
The following items are recommended:
• Target design, this is usually a wire-wrapped or printed circuit prototype that
includes a socket for the target device which the emulator cable/pod plugs
into.
• C-Compiler
PS002601-Z8X0300