Z86L98ZEM Datasheet, PDF (10/10 Pages) Zilog, Inc. – Z8 In-Circuit Emulator

Z86L98 ZEM
Z8 In-Circuit Emulator
8
Caution:
A shorted PLCC or DIP OTP can crash the emulator when
inserted into the OTP programming socket. If a PLCC part
is inserted and causes a temporary short, then the part
loses its functions. An attempt to perform BLANK CHECK
on such a part causes the hour-glass to appear
continuously. The Windows application must be reset and
restarted.
13. The bits of non-implemented features for devices having PC ON register
must be set to State1 on the emulator.
14. When interrupts are enabled, setting a breakpoint after a Halt instruction,
breaks the emulator at the first instruction in the interrupt service routine that
is serviced when an IRQ occurs.
15. SCLK/16 Mode of SMR register is not supported.
16. The OTP activity bar is not proportionate to the address being processed.
PS002601-Z8X0300