Z51F3220 Datasheet, PDF (52/54 Pages) Zilog, Inc. – 1 green LED to indicate USB power: D5

Z51F3220 Development Kit
User Manual
45
Appendix C. Stand-Alone Flash
Programming Using the Keil µVision IDE
Observe the following procedure to program Flash memory without debugging.
1. From the Project menu, open the Options for Target 'your project’, and click the
Utilities tab. In the Use Target Driver for Flash Programming drop-down menu
within the Configure Flash Menu Command pane, ensure that Zilog Z8051 Target
Driver is selected, as indicated in Figure 39.
Figure 39. Selecting A Target Driver For Flash Programming
2. Click the Settings button to change any additional Flash options. The Settings dialog
will appear, as shown in Figure 40.
UM024307-1112
Stand-Alone Flash Programming Using the Keil µVision