Z51F3220 Datasheet, PDF (41/54 Pages) Zilog, Inc. – 1 green LED to indicate USB power: D5

Z51F3220 Development Kit
User Manual
34
Note: This COM port can be determined from the Device Manager, as described in the the FTDI
USB-to-UART Driver Installation section on page 15.
2. Configure this port to reflect the following settings:
– 9600bps
– 8 data bits
– No parity
– 1 stop bit
– No flow control
3. Click the Call button to connect to the Z51F3220 Board. Upon connection, you should
be able to see the Demo program menu shown in Figure 31.
Figure 31. Demo Program Menu in HyperTerminal
UM024307-1112
Build and Run the Z51F3220 Demo Project