Z51F3220 Datasheet, PDF (49/54 Pages) Zilog, Inc. – 1 green LED to indicate USB power: D5

Z51F3220 Development Kit
User Manual
42
Appendix B. OCD Driver Installation on
Windows XP Systems
The driver programs for the Z8051 On-Chip Debugger are copied during the software and
documentation installation. In the following procedure for Windows XP systems, ensure
that the target side of the OCD will remain unconnected while you install these drivers.
1. Connect the OCD hardware to the USB port of your PC by connecting the A-Male end
of one of the two USB A (male)-to-Mini-B cables with the host PC’s USB port, and
connect the Mini-B end to the OCD device.
2. After the PC detects the new hardware, it will display the Found New Hardware Wiz-
ard dialog box, shown in Figure 37. Select Install from a list or specific location
(Advanced); then click Next.
Figure 37. The Found New Hardware Wizard Welcome Screen
UM024307-1112
OCD Driver Installation on Windows XP Systems